Active Member
|
Contact name:
Ningbo Forda Pipe Sealing Technology Co.,Ltd |
|
|
Descrition:
Asbestos Joint Sheet (Asbestos Gasket Sheet)
SL-3204, SL-3205: High-pressure Style: Made of the medium and long asbestos fiber and rubber, it is suitable for sealing of flange joint part of facility used in the condition of water with high pressure and high temperature, saturated vapor, overheated vapor, coal gas, inert gases.
SL-3203: Middle pressure Style: Made of asbertos and rubber, it is suitable for the sealing of flange part of facility used in the condition of water, vapor, air, ammonia-alkaline liquid.
SL-3201, 3202: Low Pressure Style: Made of asbestos and rubber, suitable for normal hot water heating facilities, low pressure water pipe, vapor pipework, it is suitable for refinery facilities, distilling pipe, diesel engine for cars, oil pipeline
Applications:
It is widely used in sealing various media such as water, seawater,high pressure steam,air,acid, alkaline, hot oil,and gases.it has widely adopted in sealing piping flanges,valves,tanks,heat exchanger,and pressure vessel at chemical processing plant,oil refinery,steel making,power plant,ship building.
Specifications:
style | Products |
SL-3201 | Asbestos-Rubber sheet(250) |
SL-3202 | Asbestos-Rubber sheet(350) |
SL-3203 | Asbestos-Rubber sheet(450) |
SL-3204 | Asbestos-Rubber sheet(550) |
SL-3205 | reinforced Asbestos-Rubber sheet with Wire mesh |
SL-3206 | Wire mesh reinforced asbestos-rubbersheet with graphite coating |
SL- NY 3201 | Oil-resisting asbestos-rubber sheet(250) |
SL-NY3202 | Oil-resisting asbestos-rubber sheet(350) |
SL-NY3203 | Oil-resisting asbestos-rubber sheet(450) |
SL-NY3204 | Oil-resisting asbestos-rubber sheet(550) |
SL-3207 | Asbestos beater paper |
SL-3208 | Asbestos composite sheet reinforced with tanged metal |
SL-3209 | Asbestos composite sheet with double-face tanged CS |
style | 1250 | 1350 | 1450 | 1550 | 1550M | 1550MG | 1250N | 1350N | 1550N | 1200I | 1200DI | 1200 |
Tensile strength Mpa | 9 | 12 | 15 | 19 | 25 | 25 | 9 | 11 | 12.7 | 21.0 | 25 | 2.5 |
Agingcoefficient | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 |
Loss on ignition≤% | 30 | 30 | 28 | 28 | 25 | 25 |
|
|
| 25 | 23 |
|
Oil absorption≤ % |
|
|
|
|
|
| 23 | 23 | 23 |
|
| 50 |
Thickness increase % |
|
|
|
|
|
| 20 | 20 | 15 |
|
| 6 |
Compressibility≥% | 12±5 | 12±5 | 12±5 | 12±5 | 12±5 | 12±5 | 12±5 | 12±5 | 12±5 | 10±5 | 10±5 | 10±5 |
Recovery≥% | 40 | 40 | 45 | 45 | 45 | 45 | 35 | 45 | 50 | 40 | 40 | 40 |
Density g/cm3 | 1.9 | 1.9 | 1.9 | 1.92 | 2.2 | 2.2 | 1.9 | 1.9 | 1.92 | 0.5 | 2.2 | 0.5 |
Tmax: ℃ | 300 | 350 | 400 | 450 | 550 | 550 | 150 | 250 | 300 | 450 | 450 | 300 |
Pmax: Mpa | 3.0 | 4.0 | 5.0 | 6.0 | 12.0 | 12.0 | 2.0 | 2.5 | 3.0 | 10.0 | 14.0 | 3.0 |
Resistanceto media | Water, seawater, steam, diluted acid & alkali, gases, alcohols, salt solutions etc. under temperature and pressure | High temperature and pressure Pipe ,flange | Oils,refrigerators,solvents etc. | High pressure Pipe and flange | Water, steam, | |||||||
SiZE | 1500*2000*0.5-6MM 1500*1500*0.5-6MM 1500*4000*0.5-6MM 1000*1500*0.5-6MM 2700*3800*0.5-6MM 1270*3810*0.5-6MM | 500*1000*1.5-6MM 1000*1500*1.5-6MM TD-1200 500*1000*0.5-1 1000*1000*0.5-1 | ||||||||||
Competitive Advantage:
Competitive price, good quality
