Oopen of EPS Automatic Vacuum Block Moulding Machine Technical Parameters of Automatic EPS Block Molding Machine:
No. | Items | Unit | ABE-ZK6000V | EPS-ZK6000CV | EPS-ZK8000V | EPS-ZK8000CV | 1 | Mould Size | mm | 6120×1230×1050 | 6080×1230×630 | 8110×1240×1040 | 8110×1230×630 | 2 | Mould Volume | m3 | 7.96 | 7.96 | | 6.28 | 3 | Products Density/Proportion | kg/m3 | 6-40 | 6-45 | 6-35 | 6-40 | 4 | Production Capacity | block/h | 4-12 | 4-13 | 3-11 | 4-12 | 5 | Steam Pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 6 | Steam Inlet DN | mm | 150 | 100 | 150 | 150 | 7 | Air-compressed Inlet DN | mm | 50 | 50 | 65 | 65 | 8 | Power Supply | Power | kw | | 30 | | 30 | Voltage | v | | 380 | | 380 | 9 | Control Mode | | Automatic | Automatic | Automatic | Automatic | 10 | Structural Features | | Hydraulic Sliding-door Vacuum Cooling | Hydraulic Sliding-door Vacuum Cooling | Hydraulic Sliding-door Vacuum Cooling | Hydraulic Sliding-door Vacuum Cooling | 11 | Control System | | PLC with Touch Screen | PLC with Touch Screen | PLC with Touch Screen | PLC with Touch Screen | 12 | Max. Contour Size | Mm | 14000×4000×3000 | 14000×4000×3000 | 16000×4000×3000 | 16000×3000×3000 | 13 | Machine Weight | Tons | 15 | 12 | 17 | 13 | 14 | Automatic Feeding Device | | Supplied | Optional | Supplied | Optional | 15 | Electronic Weight | | Supplied | Optional | Supplied | Optional | 16 | Printing | | Optional | Optional | Optional | Optional |
Main Features of EPS Block Molding Machine: 1. With the use of PLC Controller (Programmable Logic Controller) and
Touch Screen, the automatic looping process of opening and closing
of the moulds, feeding, heating, heat preservation, cooling, mould
ejection, and releasing the final product from the machine will be
accomplished; 2. The Automatic Vacuum Control System does the feeding, heating, heat
preservation and cooling; 3. The Vacuum System consists of the Vacuum Storage Tank, Vacuum
Condensate Tank, and highly efficient water-recycling vacuum pump; 4. The machine is coupled by using high quality welding method, and to
get rid of the rust, polishing, smoothing and aging treament, which
gives the machine high strength, and without deformation. The
density of the EPS Block can reach 6-40kg/m3, with fast EPS Block
forming speed, uniform bonding, low moisture content, and with very
minor deformation; 5. Applying a special Teflon coating to the surface of the mould
cavity (Optional) makes the EPS Block to be easily ejected or
released out of the mould; 6. The thickened wall Vacuum EPS Block Forming Machine has Automatic
Conveyer, Automatic Electronic Weighing Scale, and the Automatic
Printer; 7. This machine can be used to produce the width of 850mm, 950mm and
1150mm EPS Blocks, and also produce the width of 1000mm EPS Block
for buildings;
The Vacuum System Principle Drawing of EPS Vacuum Block Molding
Machine:
Applications of Automatic EP, S Vacuum Block Moulding Machine: | | | EPS Block | EPS , Boards | EPS Sheets |
|