Active Member
|
Address: Units 2 Lane 4,Yangmei ShangDuan Viliage,BanTian LongGang District Shenzhen China. 518129
Phone: 86-755-89205547
Contact name:Ms. Robin Liu
GOIN LED LIGHTING LIMITED |
|
Constant Voltage Panel Light works with DC12V driver, and it can be used by PWM dimming system to control.
DC 12V Constant Voltage LED Panel Light
LED panel lamp is a kind of top grade indoor lighting; the edge frame is made of 6063 aluminum by anodic oxidation. It adopts high brightness SMD 3535 and SMD 5050 as light source. The led light becomes an equal panel lighting effect after permeating the light guide plate with high transmission rate. The led panel lamp is mainly used for meeting room, negotiation room, hotels and other indoor lighting places, etc.
The Unique design of the led panel lamp makes the entire light get well and equal illumination, which can reduce the tired feeling of eyes. Considering from green light design, it has smooth outside appearance and low power consumption, and the materials is environment friendly. It does better than the Grille lamp light on lighting efficiency and brightness. It is going to replace the Grille light with source of T8 fluorescent tubes. The lifespan of led panel lamp is 10 times of the traditional tube lights, but the power consumption is only a half.
It has ultra thin design appearance and 4 edges connected with each other smoothly, which makes perfect effects.Constant Voltage Panel Light works with DC12V driver, and it can be used by PWM dimming system to control.
Square Constant Voltage Panel Light:
Round Constant Voltage Panel Light:
Product connection diagram:
Dimmer function instruction:
You can use our dimming controller and 6A dimmer, the connection
method are on above for your information.
Dimming controller:Using LED dimming controller can realize brightness adjustment of single color panels. Remote control and manual program are available, and on the remote, bottom A can change 8 different kinds of lightness, + can increase brightness, - can reduce brightness. Please refer to the introduction of the Dimming controller for more details.
6A Dimmer:This dimmer is a manual dimmer using PWM dimming function and it can connect about totally 70w panel lights.
Product Parameter
Part No. | G-PLCV R8W | G-PLCV R12W | G-PLCV R18W | G-PLCV R22W | G-PLCV S18W | G-PLCV S37W | G-PLCV S32W | G-PLCV S63W | |
| Product Name | Round 4" | Round 6" | Round 8" | Round 10" | Square | Square | Square | Square | |
| Dimension (mm) | 300*300 | 300*900 | 600*600 | 600*1200 | |||||
| ∅121X26 | ∅172.4X26 | ∅223.2X26 | ∅270X26 | 300x300 | 300x900 | 596x596 | 596x1200 | ||
| Hole(mm) | ∅108 | ∅160 | ∅210 | ∅260 | |||||
| Weight(kg) | 0.13 | 0.3 | 0.5 | 0.85 | 1.6 | 5 | 5.8 | 11 | |
| Power(W) | 7.4 | 11.5 | 18 | 22 | 17 | 37 | 32 | 63 | |
| Luminous flux (Lm) | 250 | 480 | 860 | 1160 | 680 | 1670 | 1340 | 2580 | |
| Illuminance (lux) | 1M | 118 | 192 | 580 | 480 | 298 | 731 | 569 | 1258 |
| 3M | 25 | 49 | 168 | 122 | 89 | 180 | 141 | 295 | |
| 5M | 11 | 23 | 72 | 52 | 35 | 81 | 63 | 128 | |
Attention:
1. Suggested working temperature is -20˚C ~ + 40˚C, or it would
bring bad effects to lifespan of the lights once exceed the scope
temperature.
2. Indoor use only.
3. Lamp installation and maintenance work must be operated by
professionals.
Remarks:
This unit carries a risk of electric shock. Please do not Open or Tamper with the internal parts of this panel. This will void any warranty that the units may carry. Please make sure to turn off all power prior to installation, removal or inspection. This device is intended to be used indoors in dry locations. Any contact with moisture will likely cause a short in the panel light and will void any and all warranty.
