classic T8 LED Tube | G-T8 I series

classic T8 LED Tube is top class indoor-use lighting fixture. Adopts high bright SMD5050 & SMD3528 as light source, light uniformly, wide illuminate area, low light decay, 3-4 times brighter than traditional fluorescent lights. 6063 pure aluminum oxidized housing. The pins at two ends designed incorporate with the end part of the light body, nice and elegant appearance look. High transparent cover, stripes cover, milky cover available. Our LED tube light is environment friendly with raw material, low power consumption, high lighting efficiency and long lifetime, it is the ideal replacement for traditional T8 tube lights. LED tube light widely used in offices lighting, home lighting, school lighting, and places like hospitals, subways, factory etc.

GOIN G-T8 I series LED tube light is top class indoor-use classic T8 LED Tubefixture. Adopts high bright SMD5050 & SMD3528 as light source, light uniformly, wide illuminate area, low light decay, 3-4 times brighter than traditional fluorescent lights. 6063 pure aluminum oxidized housing. The pins at two ends designed incorporate with the end part of the light body, nice and elegant appearance look. High transparent cover, stripes cover, milky cover available.

Our LED tube light is environment friendly with raw material, low power consumption, high lighting efficiency and long lifetime, it is the ideal replacement for traditional T8 tube lights. LED tube light widely used in offices lighting, home lighting, school lighting, and places like hospitals, subways, factory etc.

Technical data:

Isolux Curve:

0.6m SMD3528: 0.6m SMD5050:

1.2mSMD 3528 330pcs: 1.2mSMD 5050 120pcs:

1.2mSMD 5050 90LED: 1.5mSMD3528 390LED:

Dimension:

Advantages of LED Tube Lights:

◆Environmental-friendly: The traditional tube light has mass mercury vapor，which will cause dangerous of mercury leaking. But there is NO mercury, NO lead in the LED tube lights, and the raw material is environment friendly, it is the ideal green replacement of traditional fluorescent lights in 21^stcentury.

◆Low Heat Generation：Traditional tube lights generate massive amounts of heat, while LED lights convert electronic power to light power largely, ensure the lowest waste of energy.

◆Eyes protection：Traditional tube light work by alternating current, every second it flicks 100-120 times which will cause eye fatigue easily. LED tube light NO noise, NO flickering, protect eyes effectively.

◆100-240V AC wide voltage input：Traditional tube light work with high voltage rectifier gives out, when voltage goes down, the lamps can not star-up. LED tube light work with wide range of voltage.

◆Energy-saving, long lifetime：1/3 power consumption of the traditional fluorescent lights, but 10 times longer lifetime than traditional tube lights. Can work for long time without replacement, low maintenance cost.

• Strong and stable：LED tube light use epoxy resin but not traditional glass in housing, which makes the lamp stronger and more stable..

Features of Our LED T8 Tube Lights:

◆Hyperstable:100-240V isolate driver built-in, short circuit protection, open circuit protection, overload protection etc.

◆Hypersafe: ETL standard approved, beard 4000V high voltage shock

◆High Power Factor: >0.95

◆Low harmonious wave: Harmonious wave is less than 15%

◆Energy Saving: constant current, low power consumption, electrooptic power near 100%

◆High brightness: high bright SMD5050 & SMD3528 as light source

◆Delay Star-up: delay star-up for 1 second, no impulse current to LED, longer lifetime

◆6063 oxidized aluminum housing, take away heat effectively, reflow soldering, steady quality;

High transparent stripe PC cover, solve LED glare issue

◆Elegant appearance, integrated pins design

◆Environment-friendly: NO UV, NO radiates infra-Red light, NO mercury

◆Long lifetime: life time 50,000-80,000 hrs, 10 times longer than traditional fluorescent tubes

• Easy installation: install LED tube lights directly, work with 100-240v wide voltage.

Product installation

• inductance holder
• turn off the power
• take off the original tube
• take off the starter
• install the LED tube light

• electronic holder：
  • turn off the power
  • take off the original tube
  • Take off electronic ballast, connect as below shows
  • install the LED tube light

Common Errors and Solutions

◆If the LED tube light can not be lighten up，please make sure the power is connected well and switch is on

• If the LED tube light lighting on and off, please make sure the power is connected firmly .

Note：If the LED tube light still do not work, please consult to professional staff

Packing, transportation, storage

◆Put on product name, part number, manufacturer logo, QC testing certificate etc on the package along with datasheet.

◆Suitable for vehicle, boat, airplane shipping, please cover the goods to protect from the sunburn, upload and download the goods carefully during transportation;

• Store in the package if product not being used. Storing temperature is -20℃～+45℃，relative humidity is 0%－95%. Make sure far away from harmful gas, combustible, explosive goods and corrosive chemicals. Package should keep at least 20cm from the ground and 50cm from wall, heat source, window or air entrance.

Notice

◆LED tube light can be used in traditional T8, T10 brackets.（Just need to take off the ballast）

◆Please keep the correct voltage for the LED tube light.

◆Do not take apart the LED tube light.

◆Suggest take offthe inductance ballast, indoor use Only