This pump series is a cantilever-type horizontal
single-stage-single-suction centrifugal pump. Its flow contact
parts are made of steel-lined polyethylene with ultra-high
molecular weight (UHMWPE). The material is a new
corrosion-and-abrasion- resistant engineering plastic for the use
of pump in the world. Its unique features are good resistance to
abrasion, good resistance to shock (specially for low temperature
shock), resistance to creep deformation (resistance to crack
resulted from ambient stress), and excellent resistance to
The pump is of remarkable characteristics: multifunction, i.e. the
pump is suitable for many working conditions. For example, it can
be used in conveying acid and alkali clear liquids or slurry,
varieties of corros-ive mine slurries of metallurgical industry,
varieties of thin acids of sulfuric acid industry, varieties of
waste water of environment protection industry, etc. Because of the
resistances to corrosion and abrasion, it is widely used.
Brief Introduction To Main Technical Properties.
1.Model: UHB-ZK series
2.Characteristics: resistance to corrosion and abrasion, one pump
for multiple uses, suitable for acid and alkali clear liquids or
(1) the pump body is made of steel lined with polythene with
ultra-high molecular weight polyethylene. Its lining thickness is
(2) The blade wheel has two types: open -type and closed type. It
can be optionally chosen according to conditions of media.
(3) Seal: K-type dynamic seal.
4.Applicable media: sulfuric acid with concentration of less than
80%, nitric acid with concentration of less than 50%, hydrochloric
acid with various concentration, liquid alkali, etc. It is used not
only for clear liquid, but also for slurry.
5.Main technical data: working temperature:-20 to 8 0 degree
celsius; (for special requirements and improved materials, the
temperature can be up to 105). Inlet diameter: DN32-600mm Flow:
5-2000 m'/h Lift: not more than 50m