Small Desk Type Sps Furnace Rapid Pressure Sintering System Spark Plasma Sintering Furnace

 
3. Equipment Features

1. working temperature up to 2400°C
2. vacuum: 5×10-3mbar
3. furnace gas: Ar / N2 (and others, on request)
4. servo hydraulic force control
5. precise, rigid frame with low deformation, accurate guiding of the pressing dies
6. measuring of densificatio path
7. double-walled water-cooled stainless steel vacuum vessel with a leak rate of up to 1×10-3 mbar l/s
8. easy accessibility
9. temperature measurement and control can be chosen between axial/radial pyrometer or flexibl thermocouples
10. freely programmable sintering parameters for up to 50 segments per recipe
11. freely programmamable pulse on/off (1...255 ms) for each segment individually
12. heating rate up to 1000 K/min
13. extensive software for data recording and evaluation of all sintering parameters
14. user friendly online process management system

4. Applicable
 

Metal:Fe, Cu, Al, Au, Ag, Ni, Cr, Mo, Sn, Ti, W, Be, etc.

Ceramics Oxyde: Al2O3, Mulite, ZrO2, MgO, SiO2, TiO2, HfO2
Carbide: SiC,B4C, TaC, WC, ZrC, VC
Nitride: Si3N4, TaN, TiN, AlN, ZrN, VN
Boride: TiB2, HfB2, LaB6, ZrB2, VB2
Fluoride: LiF, CaF2, MgF2
Cermet: Si3N4+Ni, Al2O3+Ni, ZrO2+Ni, Al2O3+Ti, SUS+WC/Co, BN+Fe, WC+Co+Fe
Intermetallic Compound: TiAl, MoSi2, Si3Zr5, NiAl, NbCo, NbAl, LaBaCuSO4, Sm2Co17
And other Organic Material, Composite Material.

 
5. Equipment Characteristics
 

• Fast sintering, good energy-saving, high efficiency
• Adopts DC pulse to realize the heating cycle.
• Through absorption and digestion of the Japanese technology, we create our own equipment with lateral door-opening framework. All the processing location are processed precisely by the machining center, to ensure no errors exist in every parts. Meanwhile, the pressure heads up and down keep concentric, same place and simultaneous.

 
6. Supply Scope
 

7. Consumables and Spare Parts (for one-year furnace operation)

The following parts are susceptible to wear and tear in regular operation. We provide the following sets of spares for smooth operation of SPS equipment. These spares should be sufficient for 1 years of operation.

 
8. Customer Cases