Home Companies Ningbo Yuhui Communication Equipment Co.,Ltd

3M Scotchlok 4460-D Shield Bond Connectors for Multi Pair Copper Cable Low Resistance

Contact Us

[China]

Trade Verify

Address: 1504 Room, Aolisai Building, No. 958, Qianhu North Road, Ningbo 315000,China.

Contact name:Yvonne Hsiang

Ningbo Yuhui Communication Equipment Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

3M Scotchlok 4460-D Shield Bond Connectors for Multi Pair Copper Cable Low Resistance

Country/Region china
City & Province ningbo zhejiang
Categories Other Electronic Components

Product Details

3M Scotchlok 4460-D Shield Bond Connectors for Multi-Pair Copper Cable Low Resistance Electrical Connection

 

Quick Detail:

 

1. Material:Copper with zinc for the connector,stainless steel 304 for the Nut

2. For 100-pair or less and can be used on all cable with 20.3 mm (0.8") or smaller O.D.,keep stable but Low Resistance Electrical Connection.

3. Shield bond connector 4460-D

4. Consists: Connector base,connector top,two NUTs.

5. Pack:1000pcs/CTN 

 

 

Description:

 

Crocodile Clamp CABLE SHIELD BONDING CLAMP

 

When used in pairs or multiple applications the Crocodile bond clamps restore the shield continuity to

cable sheaths that have been cut to accommodate splices. They can also be used to connect the cable shield to ground through ground rods, messenger wires,pedestal housings or splice closures.

 

BENEFITS

• Compact design makes the it ideal for small cable diameters.

• Sharp perforated teeth on its base guarantee quality,low contact resistance bonds.

• Meets or exceeds shield current carrying capacities of 1000 AMPS for 20 seconds.

• Standard Mk-216 tool is used for its installation.

 

The 4460-D Shield Bond Connector is a downsized version of the 4460 shield bond connector. Suitable for 100-pair or less and can be used on all cable with 20.3 mm (0.8") or smaller O.D.

Its current-carrying capacity is equal to or better than aluminum-shielded cables of 100-pair or less and can be used on all cables with 20.3 mm (0.8") or smaller O.D.

 

Aerial Strand Mount for multi-pair cables,100-pair or less and can be used on all cable with 20.3 mm (0.8") or smaller O.D.,keep stable but Low Resistance Electrical Connection.

 

Installation

 

Connecting cable shields To connect the cable screens to the kits, there are 4460D connectors and an insulated screen wire. Insert the base of the shield connector under the cable sheath, between the shield and the waist insulation of the cable until it stops in the sheath of the sheath. Expand the screen wire along the cable . If the outer diameter of the cable is less than 20 mm, cut a shell 25 mm long from the diametrically opposed side of the screen connector . Attach the cover to the base screw. Tighten both parts with one nut. Perform similar operations on the second spliced ​​end. Cable shields on the branching side should be connected using a screen jumper. Wear the screen wire on the connector studs and fix it with the second nut.

Splicing of cores Depending on the configuration, the connection of the cores can be made in one of the following ways: UY2 or UR2 connectors (YH-5022 YH-5023), using the E9Y tool (YH-8021),25 paired modules with the help of the tool 4021-M / 36 or 10 pairs of modules using the tool 9755-10.

 

For further installation with 3M sealing tapes,insulation tapes, mastic tape 2900R,EZ 2183 tape,Mastic 2229 tape,and so on,welcome to check.

This 4460-D Shield Bond connector can be used for both solid/Single or double sheath copper cables.The cable must be firstly cut the shield flush with the sheath,and then tabbed with a 1"(25mm) slit on the side of the sheath opposite the connector,to ease insertion and to avoid conductor damage.

 

Then insert the connect base between the shield and core wrap,or inner sheath for double sheath cable,until the connector stops to meet the outer sheath.Tap the sheath above the connector base to set teeth (with Tabbing Shears).Then put the connector top,Nut,if the bond braid or additional grounding or bonding hardware is used,install it above the first nut and secure it with the additional nut.Torque the nuts to 35-45 inch-lgs (4.0-5.2kgm) with tool( with 3/8" Terminal Wrench).

 

3M 88T vinyl electrical insulating tape for wide size 19mm,25mm,length 10M 20M,3M 33+ scotch super vinyl electrical tape,2183EZ wrap elastic vinyl tape,3M 2228 rubber mastic tape,3M 2900R mastic sealing tape,3M VM-101 vinyl mastic tape,T300 sealant tape,Armorcast structural material 3M 4560

 

Applications:

 

Aerial Strand Mount for multi-pair cables,100-pair or less and can be used on all cable with 20.3 mm (0.8") or smaller O.D.,keep stable but Low Resistance Electrical Connection.

 

 

Specifications :

 

 

 Accessory Type‎

‎ Shield Connector

 Alligator Jaws‎

‎ No (Slitting Required)

 Applications‎

‎ Aerial Strand Mount

 Bonding Type‎

‎ Shield Bond Connector

 Cable Type‎

‎ Copper

 Compatible With‎

‎ Spiral End Seal SLiC™ Terminals,‎ SLiC™ 533 & 733 Closures,‎ Fiber Dome Terminal Closures (FDTC),‎ 2178 Closures,‎ All Copper Closures,‎ LL Closures,‎ Fiber Dome Closures (FDC),‎ SLiC™ 530 Terminal Closures

 Encapsulated‎

‎ No

 Family‎

‎ LL Series

 Flame Retardant‎

‎ No

 Indoor/Outdoor‎

‎ Indoor,‎ Outdoor

 Maximum Cable Outside Diameter‎

‎ 0.80 Inch (equal to 20.3mm)

 Nut Type‎

‎ Flanged

 Product Type‎

‎ Accessory

 With a Protective Shoe‎

‎ No


 

 

Hot Products

10Pair Unprotected Subscriber Terminal Box ( STB ) Aerial / Wall Distribution Point Outdoor ...
10Pair Wall Distribution Subscriber Terminal Box Polycarbonate Quick Detail: 1. Outdoor DP Box ...
10 pair Terminal Block Box With Subscriber Terminal Block Modules(STB Module) used in outside plant ...
20Pair Wall Distribution Subscriber Terminal Box Polycarbonate With 5-point plug-in module Quick ...
10Pair Wall Distribution STUB Subscriber Terminal Box Polycarbonate Quick Detail: 1. Outdoor DP Box ...
10Pair Wall Distribution Subscriber Terminal Box Polycarbonate With 5-point plug-in module Quick ...