10Pair Unprotected Subscriber Terminal Box ( STB ) Aerial
/ Wall Distribution Point Outdoor Waterproof
1. Outdoor DP Box Plastic for STB Modules 10pairs
2. Material:PC,with steel rails.
3. Cable grommets for wire entry and exit is for waterproof.
4. For plug in module (subscribe connector unit )unprotection and
protection over voltage and over currence.
5. With screw lock
6. Application:Ourdoor or indoor
7.The module offers connection point between an exchange-side cable pair and a
The STB shall be used as a connecting, testing capability point for
up to 4 & 10 pairs of secondary cable , or buried service wire
( BSW ) or drop wire on the network side and the subscriber`s
indoor wire on the customer side . STB's shall be installed outdoor
on the customer's perimeter wall.
Mainly used in terminating cables of secondary telephone networks
to the cable pairs of subscriber lines.
The connection module provides a connection point between an
exchange-side cable pair and a distribution pair. It incorporates a
5-point plug-in module to provide continuity and a range of other
options. Removal of the plug-in module does not disturb wire
connections but makes contacts to them available for testing to
both sides of the network.
Arial DP is equipped with pole mounting accessories as
It is especially recommended for:
Outdoor connections where the environmental conditions are
Terminations where user development characteristics require future
flexibility in terms of the type of protection or filtering
capabilities.Empty distribution box for 1pair dropwire module(STB
module),offerring good connection environment for
The box consists of a body and cover which house modules on a DIN
rail.Provision for wall mounting is incorporated in the body of the
box. The lid has various opening positions, which can be selected
according to the amount of working space available, and is also
fitted with a seal to limit water entry.
Grommets are provided for dropwire and pair access.
The connection modules are designed for mounting on a standard DIN
rail and can therefore be mounted in a variety of housings in
whatever quantities are required.
The subscriber connector unit consists of a rectangular box base with a cover and a connection
module secured to the base.The top and base are hinged together,
and the top is easily removable to facilitate working in cramped conditions.The cable
grommets for wire entry and exit may be adjusted to conductor size
and are also removable.A metal screw is provided for grounding
Application for replacing Tyco VX-SB subscribe connector unit
terminal blocks,Connecting 1 pair module without protection,module with surge
protection (gas-discharge instrument with surge protection to 230V) and module with overvoltage and overcurrent (overvoltage to 230V, and by two resistors PTC, which protect from
Used in interconnection point between secondary cable and
service wire to subscribe houses.For mounting to
walls,wood,metal or concrete poled
Outdoor waterproof Distribution Box :The type of STB module is required as your application.
-G is for YH-5027 unprotected,
-R is for YH-5028 with GDT protection,
-O is for YH-5029 with GDT and PTC protection.
standard with expansion bolt for wall mounted.The accessories for
pole mounted is on requirement.
|YH-3010-1||1pair DP box for STB module (EMPTY) 95*45*50mm|
|YH-3010-1G||1pair DP box with STB module(YH-5027) 95*45*50mm|
|YH-3010-1R||1pair DP box with STB module(YH-5028) 95*45*50mm|
|YH-3010-1O||1pair DP box with STB module(YH-5029) 95*45*50mm|
|YH-3010-2||2pair DP box for STB module (EMPTY) 145*95*75mm |
|YH-3011||10pair DP box for STB module (EMPTY) 195*195*85mm|
|YH-3012||20pair DP box for STB module (EMPTY) 350*190*95mm|
|YH-3031||10pair DP box for STB module (EMPTY)|
|YH-3032||20pair DP box for STB module (EMPTY)|