Active Member
|
[China]
Address: 36# Yuefeng Road Zhangjiagang City Jiangsu Province China
Contact name:JACKY
Zhangjiagang City Stelle Coating Equipment Co.,Ltd. |
|
|
Manual Castings Sandblasting Room Vacuum Sandblasting Chamber Air Sand Blasting For Derusting Remove Paint
Main features:
Part III Installation and After-sales Policies
3.1 Installation, Commissioning, Training and Acceptance
l Seller will send two engineers to buyer’s factory to supervise installation.
l Seller will provide training to buyer’s relevant employee. And seller will provide
“Operation and maintenance manual “
“ Electric schematic diagram”
l Seller will try the machine to reach surface requirements indicated in the quotation.
l Buyer will afford the visa, round trip tickets, transportation, translation, hotel, and meals.
l Buyer will provide finished pits according to drawing by seller, 4 welders and other necessary labor workers, and
necessary toolings, facilities, and powers.
l Buyer will pay each engineer USD$100 per one day. The date will be countered from the date when the engineer
departure from buyer’s factory. All the holidays and weekends will be included. Buyer will sign on the “ Testing and acceptance agreement” after the successful trial.
Principle Introduction:
| No | Comparison item | Honeycomb wind circulation sandblasting room | Traditional mechanical circulation sandblasting room
|
| 1 | Infrastructure
| 0.5-1.2 m or no foundation, low construction cost. . | 2.5-4 m deep pit, high waterproof requirements, foundation construction costs are several times higher than pneumatic recovery.
|
| 2 | Abrasive | Abrasive sorting There is separate sand returning fan. The cyclone separator is used to sort the abrasive. The particle size can be adjusted accurately, and the dust is large.
| There is no separate return sand blower, and the suction pipe is used for vacuuming. The particle size of the abrasive cannot be adjusted, and the air volume of the dust is not easy to be enlarged, and the sprayed abrasive is not uniform;
|
| 3 | The over-all layout | beautiful, the floor space is small, and the installation is convenient. Since all the equipment are connected by pipes, the installation positions of each system can be installed at will according to the site conditions.
| Each transmission system needs to be closely coordinated, it is impossible to change the installation position, the floor space is large, and the maintenance is inconvenient.
|
| 4 | Abrasive accumulation in the sand return system Abrasives | remaining in the sand return system and fewer Abrasives
| remaining in the sand return system, such as screw conveyors, bucket elevators and other equipment will accumulate a large amount of abrasive
|
| 5 | Occupational safety and environmental protection | The overall sand-absorbing and dust-absorbing floor, the wind flow from top to bottom, the dust suppression environment, dust content, visibility, dust emission are better than the national standard.
| Because the underground material needs to be installed with sand conveying equipment, the suction method is generally sucking up. The wind or side suction forms a dusty environment with high dust content, low visibility, and poor working environment.
|
3.2 After-sales Service
l 1 Year guarantee time. Easily worn parts and spare parts are not included.
Extended guarantee will be available basted on mutual negotiation.
l Whole-life technical support. Any problem during using appears, will reply within 8 working hours with technical
solution.
l Worn parts and spare parts will be available through the machine life
Part IV Our Technical Advantages
l Flat trolley type sand blasting machine as requested. Work pieces are hoisted and transferred to sealing sand blasting
room by the flat trolley with manual sand blasting.
l New type scraper abrasive conveying structure, save 70-80% foundation costs.
l 1 set of continuous sand blasting system with 2pcs spraying guns per set.
l Flat car provided by customers, conveniently delivers work pieces in and out of sand blasting room.
l Dust removal in multiple positions, greatly improve blasting efficiency and guarantee cleaning effect.
l Operation safety doors both on front and back positions to guarantee safety of labors.
