Glass Bead Blasting Machine Surface Rust Paint Removal High Abrasive Flow

Stelle All-In-One Suction Type Sandblasting Cabinet Solution

Cabinet Dustless Mold Blasting Machine Surface Preparation Computer Shell / Foot Valve

Application:

heavy industrial sandblasting: for some bigger workpieces, with the high abrasive flow and high efficiency, widely applicable for sandblasting rust, corrosion and paint on some large workpieces.

light industrial Sandblasting: with the high abrasive flow and high efficiency, widely applicable for sandblasting rust, corrosion and paint on some large workpiece.

Key Features:

Technical Feature of STR-9060

Workroom size (mm): 900 × 600 × 640 (35”L X 23”H X 25”H)

Side door size: (mm): 470 × 500; (18”X 19” )

Main door size: (mm): 895 × 355;(35”X 13” )

Power supply: 220V 50Hz

Lighting system: 220V 36W energy saving lamp

Machine net weight: 320kg

Separator motor: 220V 50Hz 550W(customized according to customer's special)

Separator air volume: 8.5m3/min

Compressed air source requirements: gas production is 1m3 / min working pressure is 2-8bar (kg / cm2)

Technical Detail:

Sand recycling system:

This equipment adopts an automatic sand returning method. The cyclone separator is made of 3mm cold-rolled plate. The diameter of the separator is about 500mm and the height is about 800mm. It contains a filter screen, which is the core technology of the whole equipment. We have conducted multiple tests and modifications to ensure stability and separation efficiency of the equipment.

Dust removal back sand fan configuration:

The sandblasting machine is equipped with a special medium pressure blower for sandblasting, with a power of 550W and 220V/50Hz (customized according to customer's special). The outlet of the fan is around flange interface.

Dust removal system:

This equipment is an automatic dust removal method, adopting a filter cartridge dust removal method.

Filter cartridge size: 350*660mm.

Single filter cartridge filtration area: 7-10 square meters

Dust box size is about: 400*400*1750mm.

Sandblasting system:

This equipment is equipped with a set of siphon-type blasting guns. The nozzle is made of boron carbide. The diameter of the nozzle is Φ8mm. It can be fixed on the working chamber or be operated by hand. The single-gun processing efficiency is about 5-8m2/hour. There is also a blowgun for cleaning the sand on the surface of the residual product.

Control system:

Running control circuit of each motor is equipped with corresponding low-voltage circuit breakers, thermal relays, and other protective components, in order to protect to the machine when the short-circuit and overload occur in the motor; the entire metal casing of the electrical equipment all adopt neutral protection.

Control requirements:

(1) The footswitch controls the spray gun;

(2) The control button controls the dust removal device;

(3) The control button controls the switch of the illumination lamp;

(4) The control button controls the fan to start and stop;

(5) Sandblasting cannot be started without closing the door. (electrical interlock)