Pressurized Cabinet Type Sandblasting Machine to Remove Pliers Rust
Sandblasting Machine Product Introduction
1. The design is novel, the operation is convenient, the
sandblasting speed is fast, the sand output is large, and the
impact point is deep.
2. The blasting tank part adopts the newly developed exhaust valve
device to remove the faults that are common in domestic ordinary
presses.
3. The dust removal system that meets environmental protection
needs is configured. When the sandblasting process is performed,
the visibility inside the working cabin is high, and the dust
suction fan does not leak dust.
4. High-strength pellets can be selected to achieve the shot
peening process.
Sand is recommended: cast steel shot, steel sand, stainless steel
shot, zirconium pill, 10-30 mesh brown corundum, glass beads.
Not recommended: quartz sand and abrasives such as brown corundum,
glass beads, etc.
Technical Features:
NO SPACE(mm) SIZE(mm) FAN AIR COMSUMPTION(m3/min/Mpq)
STR-9080P 900*800*650 900*1300*1700 550W 1.6-3m3/min/0.8Mpq
STR-1010P 1000*1000*700 900*1500*1800 750W 1.6-3m3/min/0.8Mpq
Application:
Clean the tiny burrs, surface residues, etc. of the machine.
It can be used for pre-treatment of surface coating and pre-plating
of workpieces to obtain active surface and improve adhesion of
coating and coating.
It is used for finishing of high-precision, high-roughness,
roughness Ra, and complex-shaped parts that are difficult to
achieve with other machining methods.
Used to improve the physical and mechanical properties of the
machined surface, such as changing the surface stress state and
improving the lubrication conditions of the mating parts.
Used for surface strengthening treatment to eliminate stress.2 Used
as an old machine refurbishment.
Used for mold cleaning, without hurting the mold surface, ensuring
mold accuracy and improving product quality.
Conventional standard model
