Active Member
|
[China]
Address: Room 901, Jinri Jiayuan, South Tangjiaqiao Rd, Wenzhou, 325000 China
Contact name:
Kaysuns Industry Ltd. |
|
|
DN250 Sch40 ASTM A312, A213 Large Diameter Stainless Steel Pipe Pickled Surface
Steel pipes are found in a variety of places. Since they are
strong, they are used underground for
transporting water and gas throughout cities and towns. They are
also employed in construction to protect
electrical wires. While steel pipes are strong, they can also be
lightweight. This makes them perfect for use
in bicycle frame manufacture.Other places they find utility is in
automobiles,refrigeration units, heating and
plumbing systems, flagpoles, street lamps, and medicine to name a
few.
Cold Rolling and Cold Drawing
Cold Rolling is a preferred production process for high precision seamless tube. Most of our heat exchanger tubing and mechanical tube are made by cold rolling. This technique provides a high forming rate, narrow tolerances and good turnouts. Now the biggest diameter we can get is 168.3mm for this process.
Cold Drawing is the general process for our tube and pipe. Pipe&tubes from this process can be got a a very narrow tolerance ranges, and keep the chemical element well. Additionally, the cold drawing process is the perfect choice for situations which place high requirements on the quality of the surface structure.
Composition:
| Elements | 304L(wt%) S30403 | 304(wt%) S30400 |
| (C) Carbon, max | 0.035 | 0.08 |
| (Mn) Manganese, max | 2 | 2 |
| (P) Phosphorus, max | 0.045 | 0.045 |
| (S) Sulfur, max | 0.03 | 0.03 |
| (Si) Silicon, max | 1 | 1 |
| (Ni) Nickel | 8.0 - 12.0 | 8.0 - 11.0 |
| (Cr) Chromium | 18.0 - 20.0 | 18.0 - 20.0 |
| (Mo) Molybdenum | N/A | N/A |
| (Fe) Iron | Bal. | Bal. |
| (Cu) Copper | N/A | N/A |
| (N) Nitrogen | N/A | N/A |
| C(max) | Si(max) | Mn(max) | P(max) | S(max) | Cr | Ni | Mo | Ti | |
| TP304/1.4301 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-10.5 | ||
| TP304L/1.4307 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
| TP304H/1.4948 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
| TP316/1.4401 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |
| TP316L/1.4404 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |
| TP316Ti/1.4571 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) |
| TP321/1.4541 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-12.0 | 0.7>5x(C+N) | |
| TP317L/1.4449 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 11.0-14.0 | 3.0-4.0 | |
| TP347H/1.4912 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-13.0 | ||
| TP309S/1.4833 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 22.0-24.0 | 12.0-15.0 | 0.75 | |
| TP310S/1.4845 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 24.0-26.0 | 19.0-22.0 | 0.75 |
| Size: | DN250, Outer diameter up to 1500mm |
| Rate: | SCH5S to SCHXXS |
| Standard: | ASTM A312, A213, A268,A269, A249, A270, A376,A511; |
| Material: | Stainless:
TP304,304L,304H,316,316L,316H,316Ti,317,317L,309S,310S,310H,347,347H,321,321H,
904L, S31254
Duplex: UNS S31803 , S32205, S32750,S32760,S32304 (Mat.1.4462,1.4410,1.4501,1.4362)etc.
Alloy: Monel 400, Inconel 600, Inconel 625, Incoloy 800, Incoloy 800H, Incoloy 825, Hastelloy B2, Hastelloy C-22, Hastelloy C-276, 15-5PH, 17-7PH,Cu70Ni30(C71500/B30), Cu90Ni10(C70600/B10)etc. |
Our factory is a leading manufacturer and supplier for qualified
Large Diameter Stainless Steel Pipe, includes ASME/ASTM, EN/DIN,
JIS series stainless steel pipes, and a wide range for material
grades. For more information, please contact us.
