Home Companies Changsha Sollroc Engineering Equipments Co., Ltd

Full Size RC Drlling Bit RE531 With Carbide Buttons For Grade Control

Contact Us

[China]

Trade Verify

Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China

Contact name:Ling Bo

Changsha Sollroc Engineering Equipments Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Full Size RC Drlling Bit RE531 With Carbide Buttons For Grade Control

Country/Region	china
City & Province	changsha hunan

Product Details

RC Drlling Bit RE531 with Full Size and Carbide Buttons for Grade Control

Product Introduce:

Reverse Circulation drilling, or RC drilling, uses rods with inner and outer tubes, the drill cuttings are returned to surface inside the rods. The drilling mechanism is a pneumatic reciprocating piston known as a hammer driving a tungsten-steel drill bit.

Adavantages:

1.The process allows for faster, deeper drilling.

2.It delivers uncontaminated samples.

3.This prevents your sample from being exposed to other areas of the drill hole, which prevents cross-contamination in your samples.

Technical Parameters

RC bits Model SRC531

Diameter		No. x Button diameter mm		Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
mm	inch	Gauge Button	Front Button	Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
86	3 3/8	6 x 12mm	5 x 12mm	35	2	84	6.0	SRC531-86
89	3 1/2	8 x 12mm	5 x 12mm	35	2	87	6.1	SRC531-89
95	3 3/4	8 x 12mm	6 x 12mm	35	2	93	6.3	SRC531-95
102	4	8 x 12mm	6 x 12mm	35	2	100	6.5	SRC531-102

RC hammers

Hammer	Bit Shank	Hole Range (mm)	External Diameter (mm)	Length (less bit) mm	Weight (kg)	Connection Thread	Working Pressure
RC3-E531	RE531	84-100	81	1069	29	3" Remet	1.5-3.5Mpa
RC3.5-Y	RC3.5Y	98-115	94	1184	44	3" Remet	1.5-3.5Mpa
RC4-E004	RE004	111-127	107	1252	52	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E542	RE542	113-130	109.5	1191	57	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E543	RE543	120-135	116	1191	63	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E545	RE545	122-135	117.5	1261	65	4" / 4.5" Remet 4" / 4.5" Metzke	1.5-3.5Mpa
RC5-P40	PR40(RE040)	124-142	120.5	1362	80.5	3.5" / 4.5"Remet 3.5" / 4.5"Metzke	1.5-3.5Mpa
RC5.5-P52/P52R	PR52/PR52R	126-142	121	1227	68.5	4" / 4.5"Remet 4" / 4.5"Metzke	1.5-3.5Mpa
RC5.5-E547	RE547	130-146	124.5	1270	74	4.5" Remet 4.5" Metzke	1.5-3.5Mpa
RC5.5-P54/P54R	PR54(RE054)	135-150	130	1294	84.5	4.5"Remet 4.5"Metzke	1.5-3.5Mpa
RC5.5-M5456	MX5456	136-150	132	1362	90	4.5"Remet 4.5"Metzke	1.5-3.5Mpa

Working principle

RC drilling works well in both overburden and soft, broken rock formations but its main strength is when it gets to hard composite rock. It is cost efficient due to the simplicity of the percussive drilling process and because the equipment needed is less complex.

Detailed Photo: