|
[China]
Trade Verify
Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China
Contact name:Ling Bo
Changsha Sollroc Engineering Equipments Co., Ltd |
|
Verified Suppliers
|
|
|
Reverse Circulation Length 1252mm 4'' SRC004 RC Hammer For Water Well Drilling
Product Introduce:
Reverse Circulation drilling, or RC drilling, is a method of drilling which uses dual wall drill rods that consist of an outer drill rod with an inner tube. These hollow inner tubes allow the drill cuttings to be transported back to the surface in a continuous, steady flow.
SOLLROC RC hammer model SRC004:
Overall Length (less bit) | 1252mm |
Weight (less bit) | 52kg |
External Diameter | 107mm |
Fit bit shank | SRC004 |
Hole range | 115-127mm (4 1/2''-5'') |
Top sub thread | 3.5" Remet / 4'' Remet / 4'' Metzke |
Working presure | 15-35 bar |
Impact rate at 2.4 Mpa | 40Hz |
Bit SRC004 specification:Data reference by drop center face bit
| Diameter | No.*Button Dia(mm) | Recommended Shroud dia(mm) | Approx Weight (kg) | |||
| mm | inch | Gauge button | Center button | Center | ||
| 115 | 4 1/2'' | 8*14mm | 6*14mm | 2*14mm | 113 | 11.8 |
| 121 | 4 3/4'' | 8*14mm | 6*14mm | 2*14mm | 119 | 12.2 |
| 124 | 4 7/8'' | 8*14mm | 6*14mm | 2*14mm | 122 | 12.6 |
| 127 | 5'' | 8*14mm | 6*14mm | 3*14mm | 125 | 12.9 |
Adavantages:
Detailed Photo:
About us:
SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.
Delivery Way:
By Air, By express or By Sea
