|
[China]
Trade Verify
Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China
Contact name:Ling Bo
Changsha Sollroc Engineering Equipments Co., Ltd |
|
Verified Suppliers
|
|
|
Blasting Hole Drilling Parts Down The Hole Hammer 6 Inch Hammer Without Footvalve For Shank IR360
High Air Pressure DTH Hammer (without foot valve)
It's a king of high air pressure DTH hammer without footvalve,our
newest design. it's also one of the most advanced DTH hammer in the
world.
It has the following advantages:
1.Out of the trouble of foot valve fracture and expansion and
contraction;
2.Lower energy consumption and higher impact frequency. The
drilling speed is 15-30% higher than the one with foot valve;
3.Simple structure, reliable parts, long life, easy and cheap
maintenance;
4.Lower air and oil consumption, the oil consumption is about 10%
lower than the one with foot valve.
According to your request, the top sub can be made into two
spanners, an air controlling hole can be drilled on the check valve
to provide more efficient cuttings discharge.
Products specifications of Tubeless DTH hammer DHD360:
| Shank | Fit IR DHD360 shank |
| Length (less bit) | 1238mm |
| Outer diameter | 148mm |
| Top sub thread | API 3 1/2" REG pin |
| Weight (less bit) | 105kg (231lbs) |
| Hole range | 155mm-190mm |
| Working pressure | 10-30bar |
| Impact rate at 1.7 Mpa | 25Hz |
| Recommended rotation speed | 20-30r/min |
| Air consumption at 7-14 bar | 318-918CFM |
Our HD-A serises (without footvalve) DTH hammer specifications:
| DTH hammer type | HD35A | HD45A | HD55A | |
| Length(less bit) mm | 888 | 1011 | 1110 | |
| Weight(less bit) kg | 25kg (55lbs) | 39kg(86lbs) | 66kg(145lbs) | |
| External diameter mm | Φ82mm | Φ99 | Φ125 | |
| Bit shank | DHD3.5 | DHD340A | DHD350R | |
| Hole range(mm) | Φ90-110mm | Φ110-130mm | Φ135-165mm | |
| Connection thread | API 2 3/8" Reg. | API 2 3/8"Reg | API 2 3/8"Reg | |
| Working pressure | 1.0-1.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | |
| Impact rate at 1.5-1.7Mpa | 25Hz | 30Hz | 28Hz | |
| Recommended Rotation speed | 25-40r/min | 22-35r/min | 20-35r/min | |
| Air consumption | 1.0Mpa | 3.8m3/min | 6m3/min | 7m3/min |
| 1.8Mpa | 7.5m3/min | 10m3/min | 13-14m3/min | |
| 2.4Mpa | / | 15m3/min | 18-19m3/min | |
| DTH hammer type | HD65A | HD85A | HD120A | |
| Length(less bit) mm | 1238 | 1359 | 1880 | |
| Weight(less bit) kg | 105kg(231lbs) | 175kg(374lbs) | 474kg(1043lbs) | |
| External diameter mm | Φ146-148 | Φ185 | Φ275 | |
| Bit shank | DHD360 | DHD380 | DHD1120 | |
| Hole range(mm) | Φ155-1-190mm | 195mm-254mm | 305mm-445mm | |
| Connection thread | API 2 3/8"Reg | API 4 1/2"Reg | API 6 5/8"Reg | |
| Working pressure | 1.0-3.0Mpa | 1.0-3.0Mpa | 1.0-3.0Mpa | |
| Impact rate at 1.5-1.7Mpa | 25Hz | 22Hz | 20Hz | |
| Recommended Rotation speed | 20-30r/min | 15-25r/min | 15-25r/min | |
| Air consumption | 1.0Mpa | 9m3/min | 12m3/min | 28m3/min |
| 1.8Mpa | 18m3/min | 22m3/min | 50m3/min | |
| 2.4Mpa | 26m3/min | 28m3/min | 71m3/min | |
All DTH Hammer specifications:
| Hammers | Bit Shank | Connection Thread | Suitable bit | Working pressure | Air consumption | |
| 1-3" Middle-low pressure DTH hammers | RD40 box | 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min | ||
| BR1 | RD50 box | 64-76mm | 0.7-1.75Mpa | |||
| BR2 | API 2 3/8" Reg | 70-90mm | 0.7-1.75Mpa | 1.0Mpa | 4m3/min | |
| BR3 | 90-110mm | 1.4Mpa | 5m3/min | |||
| 3" hammers | DHD3.5 | API 2 3/8"Reg | 90-110mm | 1.0-1.5Mpa | 1.0Mpa | 4.5m3/min |
| COP32/COP34 | ||||||
| M30 | 1.5Mpa | 9m3/min | ||||
| 4" hammers | DHD340 | API 2 3/8"Reg | 105-130mm | 1.0-2.5Mpa | 1.0Mpa | 6m3/min |
| COP44 | ||||||
| QL40 | ||||||
| SD4 | 1.8Mpa | 10m3/min | ||||
| M40 | 2.4Mpa | 15m3/min | ||||
| 5" hammers | DHD350 | API 2 3/8"Reg/API 3 1/2"Reg | 130-156mm | 1.0-3.5Mpa | 1.0Mpa | 9m3/min |
| COP54 | ||||||
| QL50 | ||||||
| SD5 | 1.8Mpa | 15m3/min | ||||
| M50 | 2.4Mpa | 23m3/min | ||||
| 6" hammers | DHD360 | API 3 1/2"Reg | 152-203mm | 1.0-3.5Mpa | 1.0Mpa | 10m3/min |
| COP64 | ||||||
| QL60 | ||||||
| SD6 | 1.8Mpa | 20m3/min | ||||
| M60 | 2.4Mpa | 28.5m3/min | ||||
| 8" hammers | DHD380 | API 4 1/2"Reg | 200-279mm | 1.0-3.5Mpa | 1.0Mpa | 15m3/min |
| COP84 | ||||||
| QL80 | 1.8Mpa | 26m3/min | ||||
| SD8 | 2.4Mpa | 34m3/min | ||||
| 10" hammers | SD10 | API 6 5/8"Reg | 254-330mm | 1.0-2.5Mpa | 1.0Mpa | 22m3/min |
| NUMA100 | 1.8Mpa | 40m3/min | ||||
| 2.4Mpa | 55m3/min | |||||
| 12" hammers | DHD1120 | API 6 5/8"Reg | 305-381mm | 1.0-2.5Mpa | 1.0Mpa | 30m3/min |
| SD12 | ||||||
| NUMA120 | 1.8Mpa | 56m3/min | ||||
| NUMA125 | 2.4Mpa | 78m3/min | ||||
SOLLROC Provide high efficiency and durable hammer all over the world.
Products photoes
