50mm Thick Inflatable Industrial Spray Booth Dust Free Equipment

50mm Thick Inflatable Industrial Spray Booth Dust Free Equipment

Basement
Floor Arrangement
2 rows of grilles made of 30x4mm flat bar and 10mm twisted steel, with surface galvanised treatment,
loading weight is 600KG/wheel, equipped with floor filter supporting frame.
3 rows of indented plate with surface painted treatment,
2 ramps, each size is 520x2,000mm(WxL).

Covered Plate
made of bended galvanised steel, 300mm high.
Supporting Frame
made of galvanised square steel tube with 40x80mm(WxL) size.
Floor Filter
Fiber glass filter laid on the filter frame,G3 Grade(EN779), type is PA-50, filtering area: 10.35M2.

Cabin
Inside Size
6,900x3,900x2,650mm(LxWxH).
Outside Size
7,000x5,350x3,400mm(LxWxH).
Entrance door
3-leaf,size is 3,000x2,600mm(WxH), made of bended steel without covered edge,with tempered glass
embedded into square frame made of color steel.
Personnel Door
1 unit, size is 700x2,000mm(WxH),with tempered glass embedded into square frame made of color steel.
Wall Panel
50mm thick and 1,150mm wide,insulation is EPS and covered by 0.426mm thick of color steel inside
and outside.Tongue and groove interlock strucutre.
Roof Panel
Made of 0.6mm thick bended galvanised plate.
Ceiling Light
Left and right upper position have 4 lighting fixtures, total 8 fixtures. Each fixture is equipped with
4 LED lights with 20W power.
Plenum
450mm high, all spare parts of plenum are made of galvanised bended steel and treated by white
powder for long using life.
Ceiling Filter
Supporting net is made of C shape steel with surface oil painted treatment,sub-high efficiency filter,
F5 Grade(EN779),type is SP-600G.

Makeup Air Units
Frame Size
1,700x1,250x2,200mm(LxWxH).
Cabinet Frame
Made of 1.5mm thick bended galvanised steel, three way connector made of alluminium alloy.
Motor and Fan
Motor type: inside of the fan; qty.:2pcs; single motor power:3KW, total power:6KW;
Fan type: double intake centrifual fans, YDW-4.5M, total air capacity: 21,000m3/h.
Makeup Air Control
by Pnematic actuator to control fresh air quantity.
Pneumatic Actuator
To control the air valve be opened or closed while the working status is spraying or baking.
Heat Exchanger
200KW, made of 1.5mm stainless steel 1Gr18Ni9Ti(SUS304), with round type multi-cycle
radiatorpipe, equipped with safe anti-explosion hole, 1M stainless steel chimney, 3M
long bended galvanisedsteel chimney and 1 pc of rain shield.
Burner
Riello G20 diesel burner, heating productivity is 200,000Kcal/H.
Filtering
Pre-filter, G3 Grade(EN779),type is C16-300 ;
Fibre glass filter, G3 Grade(EN779),type is PA-50 .
Exhaust Air Units
Frame Size
1,250x1,000x1,000mm(LxWxH).
Cabinet Frame
Made of 1.5mm thick bended galvanised steel, three way connector made of alluminium alloy.
Motor and Fan
Motor: inside of the fan; qty.:1pc; single motor power:4.0KW; total power:4.0KW;
Fan type: double intake centrifugal fans, YDW-4.5L, total air capacity: 12,500m3/h

Exhaust Air Control
Handed Actuator for Controlling the air quantity.
Equipped with 4M straight duct, 1pc 90° elbow duct and 1pc 30 elbow° duct.
Exhaust Air Filtering
Fibre glass filter, G3 Grade(EN779),type is PA-50 .
Granular Active Carbon (KC-8.0)
Control System
Pressure Gauge,Temperature Controller,Baking Timer,Hours,Spray Indicator,
Heat Spray Indicator,Bake Indicator,Failure Indicator,Left Light Indicator,
Right Light Indicator,Spray Switch,Heat Spraying Switch,Bake Switch,Left Light Switch,
Right Light Switch,power Indicator,Start Switch,Power Switch,Emergency Stop.