|
[China]
Trade Verify
Address: No.27 Zizhu Road, High-Tech Zone, Zhengzhou City, Henan Province, China
Contact name:Zoey
Zhengzhou MG Industrial Co.,Ltd |
|
Verified Suppliers
|
|
|
2019 new design wall putty making plant automatic dry mortar mixing plant
What is dry mortar:
Dry mortar is also called pre-mixed mortar, which made in the factory by precise batching and uniform mixing. It can be used directly just by adding water in construction site. It has different properties though adding different additives. The demand for dry mortar has increased rapidly due to its outstanding merit compare to the mortar production in job-site.
Raw material of dry mortar:
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives.
Descriptions of MG dry mortar mixing plant:
MG series dry mortar plant is based on the latest design concept in Europe, this production adopts the advanced computer auto-control system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration. The production line consists of storage system, metering and batching system, conveying system, mixing system, air compressor system , packaging system, and dedusting system, etc
Mixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed. Moreover, there is design with automatic rationing and packaging machine at the bottom of finished products bin, allowing for synchronous auto-packaging operation. Featured with easy and convenient operation, high efficiency, it can both obviously reduce labor intensity and effectively reduce dust pollution.
Main configuration
Electric control cabinet; Cement silo, Weighing system; Feeding
hopper; Impulse dust collector; Bucket elevator; Premix tank; Twin shaft agravic mixer; Finished product holding tank; Automatic
packaging machine; Air compresser.
It can be equipped with grinding machine and drying machine according to requirement.
Application:
The dry mortar mixing plant can produce the following dry mortars: Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.
Technical parameter of MG full automatic dry mortar mixing plant:
Model | Capacity | Occupied area | Equipment height | Manpower | Batching and packaging |
simpe dry mortar plat | 1-3T/H | 20m2 | 3-4m | 2-3 Person | Manual batching Automatic packaging |
Improved dry mortar plant | 4-5T/H | 20m2 | 3-5m | 2-3 Person | Manual batching Automatic packaging |
semi-automatic dry mortar plant | 6-8T/H | 50-60m2 | 6-8m | 2-3 Person | Manual batching Automatic packaging |
Full automatic dry mortar plant | 10-12T/H | 60-100m2 | 8-13m | 3-4 Person | Automatic batching Automatic packaging |
Full automatic dry mortar plant | 15-20T/H | 60-100m2 | 13-15m | 3-4 Person | Automatic batching Automatic packaging |
Full automatic dry mortar plant | 20-30T/H | 60-100m2 | 13-15m | 3-4 Person | Automatic batching Automatic packaging |
FAQ:
1, How about the investment of this project?
A: Our engineer can design the dry mortar plant as your requirement and your budget, different dry mortar plant investment are difference.
Low capacity low cost, we will provide you cost effective solutions as your requirement.
2, What's the difference between full automatic dry mortar plant and Semi-automatic dry mortar plant?
A: (1) Semi-automatic dry mortar plant is cheaper than full automatic dry mortar plant.
(2) Semi-automatic dry mortar plant do not need to equip silos while full automatic dry mortar equip material silos.
(3) Semi-automatic dry mortar is manual feeding and automatic weighing and packaging, Full automatic dry mortar plant is automatic feeding and automatic weighing and packaging.
3, How many person required to operate this dry mortar plant?
A: Usually 2-4 workers are enogh to operate this dry mortar plant.
4, What equipment and services you can provide?
A: We can provide you turnkey solution of dry mortar plant from working site planning to dry mortar machines, transportation, installation and training, formula of dry mortars, after-sales services, life time technical support etc.
5, What is the area required for this dry mortar plant?
A: According to the capacity of the dry mortar plant, the area required 300-100 m2.
6, What is the total power consumption (KW) of this dry mortar plant?
A: It is 20-80W based on the capacity of the dry mortar plant.
7, What is the capacity of your dry mortar plant?
A: We have dry mortar plant with capacity 3-30T/H as your requirement, and also we can customize the dry mortar plant as your capacity requirement.
8, How long is the guarantee period?
A: 12 months, within this period, we provide you spare parts and services for free.
9, Can you install the dry mortar plant in my country?
A: Yes, we will send engineers to your country for guiding installation and training your workers to operate the machine.
10, If you want to know more of our dry mortar plant, please send us inquiry or contact us directly.
If you want to know more of our dry mortar manufacturing machine, please send us inquiry or contact us directly.
