|
[China]
Trade Verify
Address: Niheqiao Industrial Zone, Zhenglu Town, Changzhou, Jiangsu, China
Contact name:
JIANGSU ZHENXING DRYING EQUIPMENT CO., LTD |
|
Verified Suppliers
|
|
|
Low Cost Multi-Layers Dewatering Machine With 0.2 - 0.8 MPa Steam Pressure For Acral Fibre, Medicine Product
Description:
This machine is a continuous penetrating flow drying equipment applied for drying pieces strip
and particles state materials with good ventilation. The machine is suitable for the materials
such as dewatering vegetable, herbal medicine of traditional Chinese medicine and others,
for which the water contents are high and high drying temperature is not allowed. The machine
owns the advantages, of fast drying speed, high evaporation capacity and good product quality.
The de-watered & filtered cake state paste material should be made into particles or strips
before drying process.
Applications:
De-watering vegetable, drying for algae, seaweeds, particle feed, shredded coconut stuffing, organic color,
compound rubber, acral fibre, medicine product, medicine material, small wooden product, plastic product,
aging and solidification for the electronic component and device.
Specifications:
spec | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 |
unit number | 4 | 6 | 4 | 6 | 4 | 6 |
belt Width | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 |
drying section Length | 8 | 10 | 8 | 10 | 8 | 10 |
Thickness of the material | 10-80 | |||||
Temperature ℃ | 60-130 | |||||
steam Pressure Mpa | 0.2-0.8 | |||||
steam Consumption Kgsteam/KgH2O | 2.2-2.5 | |||||
drying strength KgH2O/h | 6-20kg/m2.h | |||||
total power of blower Kw | 3.3 | 4.4 | 6.6 | 8.8 | 12 | 16 |
total power of equipment KW | 4.05 | 5.15 | 7.35 | 9.55 | 13.1 | 17.1 |
Competitive Advantage:
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt
generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and
move inside the dryer . The dryer is composed of several sections. For each section, the hot air
is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower.
The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt
covered with bring water material away. The mesh-belt moves slowly, running speed can be freely
adjusted according to the material property. The final products after the drying process will fall into
the material collector continuously. The top and low circulation units can be freely equipped
according to the user's requirements. The number of section might be selected according to
the production demands.
