Driver fatigue monitor with signal output 45km/h start-up speed

Description

The driver fatigue monitoring system works with powerful LS-803 monitoring system along with the monitoring hardware unit. This remarkable system is mounted on the dashboard of the vehicle facing the driver. The sophisticated camera locks in to the driver’s face and can detect facial expressions such as yawning, being distracted and even detects if the driver is not visible.

This system has been developed to help drivers and eliminate bad driving habits that can come with costly results. The system can be used for any type of vehicle, commercial or personal. It is one of the easiest systems to install and use and can be monitored using the website or the app.

Attention:

Non-authorized person, please do not open or repair the device.

Please do not operate the system when driving to avoid dangerous

Please handle carefully, do not drop or impact with hard objectives

Do not use chemicals or cleaning agents to clean the machine, it will damage the machine surfaces or rust the paint.

keep it away from water or moist place, device will be rusted or shortcut in those area.

Do not rip, bend or squeezed the wiring by heavy object, or it will be hot to fire.

Power input and output

1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm