Active Member
|
[China]
Address: No.680 Tingyi Road, Tinglin Industrial Park, Jinshan District, Shanghai, 201505, China
Contact name:Caroline Wang
Shanghai Beyond Machinery Co., Ltd |
|
|
15TPH 5-effects structure Falling Film Evaporator for pineapple
juice concentrator
Falling film evaporator
Scope of application: Applicable to the food, pharmaceutical,
chemical, biological, environmental protection, waste recycling and
other sectors of the low-temperature continuous evaporation and
concentration, this evaporator has characteristics of high heat
transfer efficiency, short heating time of materials etc, so
especially suitable for heat-sensitive, foaming material etc.
Equipment composition:The evaporator, separator, condenser, heat
pressure pump, vacuum pump, product liquid pump, condensate pump,
operating platform, instrument and valve pipeline system etc.
Five effect and seven phases evaporator (Evaporation 13.6t/h)
1. Main technical specifications
Inlet thickness: 12brix
Inlet capacity: 17.78t/h
Evaporation: 13.6t/h
Outlet thickness: 61brix
Outlet capacity: 3.2t/h
Inlet temperature 25℃
Outlet temperature 5℃
Aroma temperature 9℃
Temperature for the first effect 89℃
Temperature for the second effect 79℃
Temperature for the third effect 68℃
Temperature for the fourth effect 58℃
Temperature for the fifth effect 48℃
Pressure for the first effect (Absolute Pressure) 0. 65bar
Pressure for the second effect 0. 45bar
Pressure for the third effect 0. 28bar
Pressure for the fourth effect 0.17bar
Pressure for the fifth effect 0.1bar
Pressure for steam 7-8bar
Steam consumption 3.5t/h
Inlet temperature for cooling water 30℃
Outlet temperature for cooling water 38℃
Circulation for the cooling water 250T/h
Temperature for ice water 2℃
Consumption for ice water 20T/h
Consumption for compressed air 5m³/h
Consumption for pump water cyclic utilization
Power for motors 57KW
Diameter 10000X6000X14000(LXWXH)
2. Equipment list for 13.6t/h five effects fall filling evaporator
| Name | Specification | Material | Qty | Manufacture |
| First effect | Shell - and – tube type, with distributing device, monoblock use SUS304, Φ900, thickness is 5mm, the heat exchanging tube use SUS316L | 316L +SUS304 | 1Set | Beyond |
| Second effect | Shell - and – tube type, with distributing device, monoblock use SUS304, Φ900, thickness is 5mm, the heat exchanging tube use SUS316L | 316L +SUS304 | 1Sret | Beyond |
| Third effect | Shell - and – tube type, with distributing device, monoblock use SUS304, Φ900, thickness is 5mm, the heat exchanging tube use SUS316L | 316L +SUS304 | 1Set | Beyond |
| Fourth effect | Shell - and – tube type, with distributing device, monoblock use SUS304, Φ900, thickness is 5mm, the heat exchanging tube use SUS316L | 316L +SUS304 | 1Set | Beyond |
| Fifth effect | Shell - and – tube type, with distributing device, monoblock use SUS304, Φ900, thickness is 5mm, the heat exchanging tube use SUS316L | 316L +SUS304 | 1Set | Beyond |
| First separator | Tangent intubation should be connected with evaporator, with sight glass and CIP vent, separate the steam and liquid, material for the cylinder is SUS316, elliptical head, thickness is 6mm. | 316L | 1Set | Beyond |
| Second separator | Tangent intubation should be connected with evaporator, with sight glass and CIP vent, separate the steam and liquid, material for the cylinder is SUS316, elliptical head, thickness is 6mm. | 316L | 1Set | Beyond |
| Third separator | Tangent intubation should be connected with evaporator, with sight glass and CIP vent, separate the steam and liquid, material for the cylinder is SUS316, elliptical head, thickness is 6mm. | 316L | 1Set | Beyond |
| Fourth separator | Φ1000X3500 ,tangent intubation should be connected with evaporator, with sight glass and CIP vent, separate the steam and liquid, material for the cylinder is SUS304, elliptical head, thickness is 6mm. | 316L | 1Set | Beyond |
| Fifth separator | Φ1000X3500, tangent intubation should be connected with evaporator, with sight glass and CIP vent, separate the steam and liquid, material for the cylinder is SUS304, elliptical head, thickness is 6mm. | 316L | 2Sets | Beyond |
| Pre-heater | Material of the cylinder is SUS304, thickness is 5mm, material of the heat exchanging tube is SUS316L | 316L | 2Sets | Beyond |
| Plate heat exchanger | 316L | 1Unit | Beyond | |
| Condensor | Hybrid structure, material of the cylinder is SUS304, thickness is 5mm, Φ900 | SUS304 | 1Set | Beyond |
| Balance tank | 200L | 316L | 1Unit | Beyond |
| Injector | 316L | 1Unit | CHINA | |
| Flash evaporator | Φ1000X3000, material for cylinder is SUS316L, thickness is 6mm | 316L | 1Set | Beyond |
Feeding material pump (Double sealed) | Capacity: 20 m³/h Lift 36m, 11KW | 316L | 1Set | CHINA |
Material outlet pump (Double sealed) | Capacity 20 m³/h Lift: 26m, 5.5 KW | 316L | 4Sets | CHINA |
Cooling water pump (Double sealed) | Capacity 20 m³/h Lift: 26m, 4 KW | 316L | 2Sets | CHINA |
| Outlet pump | Capacity 10 m³/h Outlet pressure: 1.0 MPa, 4 KW | 316L | 1Set | CHINA |
| Sealing water pump | Capacity 5 m³/h Lift: 30m, 2.2 KW | SUS304 | 2Sets | CHINA |
| Aroma recovery system | Include recovery tower and condenser etc. | 316L | 1Set | Beyond |
| Operating platform | Q235 | 1Set | Beyond | |
| Stainless steel pipes, manual valves, and pipe fittings | 316L,SUS304 | 1Set | CHINA | |
| Instrument control cabinet | With Siemens PLC touch screen, fully automatic controlled | SUS304 | 1Set | Siemens |
| Cable, cable tray | SUS304 | 1Set | CHINA | |
| Digital thermometer, pressure gauge, vacuum gauge | Groupware | 12 Units | CHINA | |
| Temperature sensor | PT100 | Groupware | 11 Units | JUMAO |
| Differential pressure level meter | Groupware | 2 Units | LAMBO | |
| Pressure transmitter | Groupware | 4 Units | LAMBO | |
| Electromagnetic flowmeter | Groupware | 2 Units | E+H | |
| Drain valve | Groupware | 2 Units | Spirax Sarco | |
| Pneumatic butterfly valve | SUS304 | 1Set | ||
| Pneumatic butterfly valve | SUS304 | 1Set | ||
| Sugar concentration measurement unit | Groupware | 1Set | ATAGO Japan | |
| Steam pressure reducing valve | Groupware | 1Set | Spirax Sarco | |
| Steam adjusting valve | Groupware | 2 Units | Spirax Sarco | |
| Pressure adjusting valve | Groupware | 2 Units | Spirax Sarco | |
| Subtotal |
