Glorytek Industry (Beijing) Co., Ltd. |
Verified Suppliers
|
|
Air Drilling IADC545 Hard Rock Tricone Bit for Oil well with Elastomer Sealed Bearing
IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
114/116/117 | 0.3~0.75 | 180~60 | Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, etc. |
124/126/127 | 0.3~0.85 | 180~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
134/135/136/137 | 0.3~0.95 | 150~60 | Soft to medium formations with low compressive strength and high drillability, such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
214/215/216/217 | 0.35~0.95 | 150~60 | Medium formations with high compress strength, such as medium soft shale, hard gypsum , medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
227 | 0.35~0.95 | 150~50 | Medium hard formations with high compressive strength, such as abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble,etc |
Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
417/437/ 447/415/435 | 0.35~0.9 | 150~70 | Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, gypsum, salt, soft limestone, etc. |
517/527/515 | 0.35~1.0 | 140~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
537/547/535 | 0.45~1.0 | 120~50 | Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
617/615 | 0.45~1.1 | 90~50 | Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
637/635 | 0.5~1.2 | 80~40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
Basical Specification | |
Bit Size | 200mm |
IADC Code: | 545 etc. |
Thread Connection | 2 3/8 API REG PIN |
Series | rubber sealed / metal sealed |
Packing: standard exporting packing.
Delivery: Normally 7-10 days after your advanced payment.
The type we can supply:
Company Profile
located in Beijing,China, is an integrated corporation specialized
in manufacturing and exporting top quality drilling equipment and
drilling parts for decades. We are supported and assisted by a
highly experienced team of designers and engineers that enable us
to complete all the assigned projects successfully as per the
specified requirement from our clients.
Our products are widely used in the scope of mining, water well
drilling and exploration, anchor grouting project, side slope
protection engineering, oil and gas engineering,underwater rock
drilling & blasting operations of seaport channel, hydropower
project, national defense projects ect.
Jane Cheng
Sales Representative
Glorytek Industry ( Beijing ) Co., Ltd.
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District,
Beijing, China.
Tel: +86-10-52864265/52864786
Fax: +86-10-52037270
Mobile:+86-13426420230