|
[China]
Trade Verify
Address: No.B-2507, DongWeiCheng, GuanZhuang, Chao Yang District, Beijing 100024, P.R.China
Contact name:Alex
Glorytek Industry (Beijing) Co., Ltd. |
|
Verified Suppliers
|
|
|
HDD-25 Horizontal Directional Drilling Rig
Description
HDD25 horizontal directional drilling rig is a one piece fully self loaded design, adopts an open loop, hydraulic control mode, hydraulic system, transmission system, reducer, electrical control system, etc. are selected from domestic well-known brand products with high reliability.
Technical Date
1.Chassis
HDD25 adopts steel track self-propelled chassis, which has strong site adaptability and high reliability. It is equipped with China well-known brand walking reducer, which is stable performance and reliable quality.
| Track wheelbase | 1710mm |
| Outer width of crawler | 2060 mm |
| Track width | 350 mm |
| Gauge | 1360 mm |
| Walking reducer | IKY2.52.5A-2900 |
| Gradeability | 30% |
| Walking speed | 1.5km/h |
| Weight | 10t |
2. Engine system
The Cummins turbocharged engine is selected, which has strong power and emission meets the third stage of the country.
| Engine model | QSB5.9-C180-33 |
| Rated power | 132KW |
| Maximum torque | 800N·m /(1500r/min) |
| Rated speed | 2200 r/min |
| Meet emission standards | China Stage III |
| Fuel tank volume | 355L |
3. Hydraulic system
Both rotation and push-pull use an open hydraulic system. They are domestic well-known brand components with reliable quality.
| Power head rotation system | Rotary pump | CBGj80 |
| Pressure | 200bar | |
| Motor | Eaton 6K-490*2 | |
| Power head push-pull system | Push-pull pump | CBGj80 |
| Pressure | 200bar | |
| Motor | XM05-200*2 | |
| Hydraulic oil tank volume | 450L | |
| Hydraulic oil | HD46 (-15℃~40℃) |
4. Electrical system
| System voltage | DC24V |
| Push-pull rotary handle | 2SK6T-3XZD2 |
| Rotary handle | 2SK6T-3XZ |
| Travel switch | none |
5. Mast boom
Adopting the rear support cylinder to change the amplitude, the angle adjustment operation is simple and the range is large.
| Drill frame adjustment angle | 2~24° |
6. Power Head
The drilling rig completes the push-pull action through the rack and pinion; The floating of the power head box can effectively protect the drill pipe thread; The fixed motor realizes high-speed push and pullback.
| Maximum push-pull force | 275kN |
| Maximum push-pull speed | 35m/min |
| Maximum rotating torque | 8000 N·m |
| Maximum rotation speed | 135/68r/min |
| Maximum stroke of power head | 3500mm |
| Rotary reducer | N/A |
| Push-pull reducer | China brand |
7. Clamp
The drilling rig is equipped with a rotating self-centering clamping and unfastening device, which can clamp the drill rod firmly; The vision is good, and it is also convenient for the maintenance and replacement of the jaws.
| Shackle torque | 20000N·m |
| Shackle rotation angle | 20° |
8. Cab
Rotating noise-proof cab, with adjustable seats, equipped with heating and cooling air- conditioning, which greatly improves the operating comfort of the drilling rig. The internal lighting, windshield wiper, high-end leather seats and other configurations are suitable for operation.
| Cab width | 950mm |
| Cab length | 1200mm |
9. Drill pipes, drilling tools (optional)
Standard oil drill pipe or non-excavation special double top drill pipe can be selected; the back reamer can be fly-cutter reamer, barrel reamer, and fluted reamer. The size of the joints at both ends of the drill pipe is API NC23.
Note: The maximum push-pull force and maximum torque that the drill pipe can withstand cannot reach the maximum at the same time. To avoid sticking during use of the drill pipe, please observe the maximum connection torque limit during the use of the drill pipe.
Main technical parameters:
| Item | Parameter | |
| Engine | Manufacturers | Cummins |
| Model | QSB5.9-C180-33 | |
| Power rating | 132KW | |
| Thrust-Pull | Max pull/thrust force | 270KN |
| Max pull/thrust speed | 35m/min | |
| Rotation | Torque | 8000N.m |
| Max spindle speed | 135r/min | |
| Pipe | Diameter × Length | φ 73*3000 |
| Max inclination angle | 24 | |
| Loader Crane | Lifting weight | N/A |
| Travel driving | Style | Steel crawler self-propelled |
| Traveling speed | 1.5 km/h | |
| Weight | 10t | |
| Dimension | L×W×H | 6.0*2.06*2.3m |
Main configuration
| Rotary pump | CBGj80(Domestic) |
| Push pump | CBGj80(Domestic) |
| Rotary Motor | 6K490(Eton) |
| Rotary reducer | none |
| Push Motor | XM05 200 |
| Push reducer | G11.09HH-SRI |
| Main valve | 2GCJX-G25L |
| 2GCJX-G25L | |
| Swivel handle | 2SK6T-3XZ |
| Push and pull handle | 2SK6T-3XZD2 |
| Walking speed reducer | IKY2.52.5A-2900 |
| Hydraulic cylinders | / |
| Lorry crane | / |
| Hydraulic tubing | / |
Product Picture
Other info
