Alloy Steel Borehole Drilling Rods 76mm X 5.5mm X 1m Welding Tubes

76mm x 5.5mm x 1m welding tubes water well steel casing DTH drill rod pipe for mining

1.Description:
-The drill pipe is used to connect the surface equipment of the drilling rig and the drilling and grinding equipment or the bottom hole device at the bottom of the drilling well. It is a steel pipe with threaded tail.
-The purpose of the drill pipe is to link the ground equipment and the drill bit, and to pump the mud out of the well.
-The purpose of the drill pipe is helical to allow the drill pipe to rotate into a deeper place. The drill pipe is subjected to a relatively large force during work, so the drill pipe is relatively shock-resistant, twist-resistant, deformation-resistant, and high-strength.

2.Application:
  The scope of use of drill bits and rods: Drilling of various mines like living water wells. 
3.Specifications:

 
4.The Photo of products

 
Related Product

 

-It is not allowed to stack drill pipes directly on the ground, rails, steel plates or concrete surfaces. The first layer of drill pipe must be more than 30 cm from the ground to prevent moisture and soil from rusting.

-Drill pipe is stored on pipe racks with sufficient pier to prevent pipe bending and thread damage. The pier should be on the same plane and level, and the pier feet should be solid to prevent sinking.

-There must be isolation skids between each layer of drill pipes, and do not let the drill pipe joints bear the weight of the drill pipes. There must be at least three isolation skids for each layer of drill pipe.
 

Company Profile

Glorytek Industry ( Beijing) Co., Ltd is a professional manufacturer and supplier of drilling equipment and drilling tools with over 20 years experience. We are supported and assisted by highly experienced R & D team and engineers that enable us to complete all the assigned projects successfully as per clients’ requirements.

Our factory covers an area of 250,000 square meter, construction area is about 150,000 square meter, having machining machinery, CNC processing center, friction welding machine, testing equipment etc. over 200 sets and more than 600 employees.Our products have been exported more than 60 countries around the world.

FAQ

Q: Do you have after service?
A: Yes, we have special service team which will offer you professional guidance. 

Q: What is your payment terms?
A: We can accept T/T,L/C.

Q:.What is your MOQ?
A: No requirement for testing and we can accept trial order.