Xuanhua Jinke Drilling Machinery Co.,Ltd. |
Verified Suppliers
|
|
Characteristics
1:The Rugged track was driven by hydraulic motor with high
traveling ability.
2:The feed and rotary head were driven by hydraulic motor,
therefore, the air and oil consumption and total drilling cost are
lower.
3:The hydraulic feed and rotary head put out the biggest feeding
force and largest rotary torque, which makes it more suitable for
operation in complex worksites.
4:The compressor equipped for the rig is smaller and cheaper than
that one the air rig equipped, along with the best
price-performance ratio than air rig.
5:The Hydraulic track oscillation makes it more suitable to drill
in any rough terrain.
6:The carriage with rollers provides for minimal wear to the drill
guide.
7:The Hydraulic auxiliary functions are easy and efficient for
guide extension, boom swing, boom lift, guide tilt and guide dump.
8:The diesel engine and main hydraulic parts adopt imported
products or famous domestic brand.
9:The special compensation device makes a full protection of drill
rod threads.
Specification
1 | Rock Hardness | F=6-20 | |
2 | Hole Diameter | mm | 90-165 |
3 | Hole Depth | m | 40 |
4 | Drilling Rod Diameter | mm | 60,76,89 |
5 | Rotation Torque | Nm | 4500 |
6 | Rotation Speed | rpm | 0-100 |
7 | Max. Feed force | KN | 30 |
8 | Max. Lifting force | KN | 30 |
9 | Max. Feed Speed | M/min | 15 |
10 | Max. Lifting Speed | M/min | 15 |
11 | Max Swing of Boom | ° | 45° left / 45° right |
12 | Max Dump of Boom | ° | up60 down20 |
13 | Max Swing of Guide | ° | 30(L) / 91(R) |
14 | Max Dump of Guide | ° | 180 |
25 | Guide Extension | mm | 1200 |
15 | Feed Stroke | m | 3 |
16 | Manufacturer |
| CUMMINS |
17 | Electrical System | 24 | Volt |
18 | Compressor Pressure Required | M³/min | Φ≤115 11.3m2/min(1.4 Mpa) |
Φ≤140 13m2/min(1.4 Mpa) | |||
Φ≤165 17m2/min(1.4 Mpa) | |||
Φ≤165 21m2/min(2.4 Mpa) | |||
19 | Max. Travel Speed | Km/h | 2 |
20 | Gradeability | ° | 24 |
21 | Net Weight | kg | 6100 |
22 | Shipping Length | mm | 6900 |
23 | Shipping Width | mm | 2200 |
24 | Shipping Height | mm | 2200 |