Xuanhua Jinke Drilling Machinery Co.,Ltd. |
Verified Suppliers
|
|
Introduction
CM458 Crawler Anchor Drilling rig adopts diesel motor,hudraulic oil
pump unit offers power to hydraulic motor
moving,turn-ground,propulsion and lifting, and angle orientation of
oil cylinder,etc.When the anchor Drilling rig is working, only the
down the hole hammer consume the compressed air. The construction
drilling rig is used for water well, geothermic air-conditioner
drilling operation and various stonework blasting hole operation,
the engineering drilling rig can also realize the process such as
breast wall drilling with casing following, conduct drilling
grouting hole of the hydropower cofferdam, grouting hole for dyke
seepage control and grouting hole for base enforcement and anchor
hole.
Specification
1 | Rock Hardness | F=6-20 | |
2 | Hole Diameter | mm | 90-230 |
3 | Hole Depth | m | 40-200 |
4 | Rotation Torque | Nm | 4000 |
5 | Rotation Speed | rpm | 0-80 |
6 | Max. Feed force | KN | 30 |
7 | Max. Lifting force | Kgf | 6000 |
8 | Max. Feed Speed | M/min | 15 |
9 | Max. Lifting Speed | M/min | 15 |
10 | Max Swing of Boom | ° | 45° left / 45° right |
11 | Max Dump of Boom | ° | up60 down20 |
12 | Max Swing of Guide | ° | 30(L) / 91(R) |
13 | Max Dump of Guide | ° | 180 |
14 | Guide Extension | mm | 1200 |
15 | Feed Stroke | m | 3 |
16 | Manufacturer |
| CUMMINS |
17 | Air Compressor | M³/min | 11-25 |
18 | Compressor Pressure Required | Mpa | 1.2-2.4 |
19 | Max. Travel Speed | Km/h | 2 |
20 | Net Weight | kg | 6200 |
21 | Shipping Length | mm | 6900 |
22 | Shipping Width | mm | 2200 |
23 | Shipping Height | mm | 2200 |