Home Companies Shaanxi Aipu Solids Control Co., Ltd

APNJQ50 Mud Mixing Gun 50mm Bolt Flange 3 Nozzle Vertical Rotated

Shaanxi Aipu Solids Control Co., Ltd
Active Member

Contact Us

[China] country

Contact name:Miranda

Inquir Now

Shaanxi Aipu Solids Control Co., Ltd

APNJQ50 Mud Mixing Gun 50mm Bolt Flange 3 Nozzle Vertical Rotated

Country/Region china
InquireNow

Product Details

APNJQ50 Mud Mixing Gun 50mm Bolt Flange 3 Nozzle Vertical Rotated

 

A mud gun is operated as the equipment to supplement drilling mud or mixing mud. The mud gun's number is decided by tank size. A mud gun is usually mounted on the square tube of the mud tank top frame. Or it can be mounted close to the mud tank.

 

According to the inlet pipe size, there are 2-inch mud guns and 3-inch mud guns for options. According to different structure features, there are two types of mud guns: fixed mud guns, and rotary mud guns.

 

Vertical drilling mud gun APNJQ50 specification

 

ModelAPNJQ50
Diameter50mm
Pressure1.0Mpa
Nozzle3
RotatedYes

 

More information about mud gun

The Mud Gun is designed for submerged service in pits and is available in the 2” and 3″ sizes. Both sizes are low-pressure guns. and The 3” unit is intended for high volume service, such as mud mixing systems that employ centrifugal pumps. All Mud Guns are available with handles, which aid in the 360° rotation of the swivel joints for reducing the amount of solid build-up in tank corners.

Mud Guns also produce flow currents, which boost fluid movements and aid in the suspension or mixing of particles. In addition, Mud Guns can create an alternate product flow when used in conjunction with agitators

 

Mud guns are also referred to as jet mixers. They are best used in tank corners to keep solids from settling and a mud agitator is placed in the tank center. Mud guns number is the same as the agitator number. Usually, 3 meters per set mud gun. Mud guns can help to mix drilling fluids completely, even at the corner of the mud tank. Besides mixing drilling fluids, mud guns also help to clean mud tanks when necessary.

 

The length of a mud gun is defined by mud tank depth or height. Similar to the shaft on the mud agitator. Mud guns connected with the mud gun lines on the tank top. The line is 2'' or 3''. The mud gun inlet is 2'' or 3'' accordingly. Besides the mud gun length and diameter, the mud gun nozzles and rotatable or not are also customer-built. 

 

Nozzle's number of mud guns can be 2, 3, or 4. And the Pressure can be normal pressure or middle pressure or high pressure. A mud gun is made of high-quality seamless pipe connected with a flange and valve, and the polyurethane nozzle. The rotation angle can be 0~360°. Some clients prefer the rotatable mud gun since to mix mud without a dead corner. And more flexible on jet position. 

 

Types of vertical mud gun

 

Except for 2in mud gun, we also have made mud gun with 3in and 4in the pipe, the pressure range is 0.1Mpa~6.4Mpa. Higher pressure will perform better and safe jet work during drilling fluids mixing by mud guns. The mud gun assembly includes a handle, valve, flange, pipe, and nozzle. On the rotatable mud gun, there is a bearing between the elbow and the submerged pipe.

 

What difference between different types of mud guns?

 

The bottom-type mud guns are connected with the bottom mud line and the nozzles are at higher positions, while the non-spin type is designed for mixing large volumes of fluids on top of a tank or pit and also for transferring mud from one compartment to another. It's more flexible to install mud guns in any position necessary.

 

 

For any interest or demand on the mud guns, please feel free to contact AIPU Solids. You will get a free offer and optimal solutions very soon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Products

APMC50 Cleaning Recycling Mud Desander System Mud Reclaimer Recycler A mud system, also known as an ...
Drilling Waste Management brief All wells are drilled with generation of waste. Including drilling ...
Solids Control System in Horizontal Directional Drilling(HDD) Although the use of drilling fluids ...
Drilling Fluids Mud Solids Control System For Oil Rig Is Being Used On The Site Process of Aipu ...
Mud Tank Bottom Is Designed By Bevels Ordered By The Customer A mud tank is an open-top container, ...
Drilling Mud Solids Control System Get Good Feedback In The Field Introduction of solids control ...