Shaanxi Aipu Solids Control Co., Ltd |
Skid-mounted for ease of installation;
Venturi-type mud mixer;
Low-maintenance requirements;
Suitable for powder and liquid mixing;
Direct discharge into mixing lines.
A jet portable mud mixer is a piece of special equipment to prepare and increase the weight of the drilling fluid by adding and mixing bentonite, changing the fluid density, changing the mud density, viscosity, and dehydration. The unit includes one centrifugal pump, one jet mixing hopper, and one jet mixer that are installed in a base with pipe valves.
APSLH series jet mud hopper units are welcomed by clients for a good price and high performance. Also, we have short delivery and many models for you to choose from. Nowadays our jet mud mixer is widely used in oil and gas drilling, horizontal directional drilling, tunnel and micro tunneling, shield construction, etc.
Model | Capacity(m3/h) | Pressure (Mpa) | Motor(Kw) | Inlet (Inch) | Outlet (Inch) | Weight (Kg) | Dimension L×W×H(mm) |
APSLH150-50 | 272(1200GPM) | 0.25-0.4 | 55(75HP) | 8 | 6 | 1675 | 2200×1840×1100 |
APSLH150-40 | 150(660GPM) | 37(50HP) | 6 | 6 | 1460 | 2200×1840×1135 | |
APSLH150-35 | 90(400GPM) | 22(30HP) | 5 | 4 | 1167 | 1850×1540×1000 |
High mixing capacity. Put the drilling fluids material (bentonites, barite powder ) and the corresponding chemical additives (polymer) into the circulation tank for increasing the total
Able to handle high back-pressure
Which is designed to be economical, simple, robust, reliable, and wear-
Jet mud mixer can change the density, viscosity, and water loss
effectively, and also enhance material dispersion effect, improve
the mixed liquid pressure head.
Sand pump and jet mixing hopper can either be combined or be
installed separately, and they are connected by pipelines and
valves. Seals adopt packing and mechanical double seals, with good
sealing performance.
Single jet mud mixer is made up of one sand pump, one jet mixing
hopper that are installed in a base with pipe valves. Duplex jet
mud mixer is composed of two sand pumps and two jet mixing hoppers.
How to select and what impact mud mixing hopper unit impact
First, we should confirm the treating capacity we need. And for oil and gas drilling kindly suggest a 150m³/h flow rate. Then confirm pump, necessary pipelines and also can depend on supplier suggestion
Mixing hopper hydraulic consumption should be as little as possible, otherwise, the flow rate may decrease by too much
Distance between Venturi hopper and nozzle should be proper. The
optimal distance should be 32~90mm
Output pressure should be designed properly. If the discharge port
pressure is too high the flow rate of mixing pump will be lower
than expected
The higher pressure at the inlet port the higher the flow rate of
the mixing hopper
The higher hopper mounted the lower mixing capacity
If you have any demand for a mud mixing hopper unit ? Please contact AIPU Solids freely. Trust you will get the true cost-effective solution at the best rate.