0.4Mpa Polyurethane Horizontal Drilling Mud Desander

High efficiency drilling fluids desilter with longer using life

Aipu drilling fluids introduction

Aipu drilling fluids mud desilter is the third class solids control equipment to treat the drilling fluids. According to the size of the cone diameter, they are divided into Desander and Desilter. Usually the cone diameter is less than 6″ is called Desilter, and used as the third solids control equipment in drilling operation. We commonly used 5 " and 4" cone to separate solid-phase particle size 15-47μm in the drilling fluid. Based on customer requirements and capacity, we can select groups of cone into Desilter.

APCN Series Mud Desilter works very well with other solids control equipments. Based on customer requirements and capacity, we can select groups of hydrocyclone into desilter. The desilter of Aipu Solids Control is widely used in oil & gas drilling and horizontal directional drilling

Technical Parameters of APCN series drilling fluids desilter

Drilling fluids desilter configuration

Drilling fluids desilter is the third phase solids control equipments after shale shaker and desander equipments. It is made by desilter cyclone, inlet and outlet pipeline, steel frame and shale shaker for bottom drying.

The desilter is mainly treat drilling mud by desilter cyclone by centrifugal force. It is popularly use 4” desilter cyclone for separate solids 15 – 25 microns and above, the majority larger solids particles was separated by centrifugal force and drop out from desilter nozzle and fluids content overflow from top outlet and discharge to tank compartment. There maybe a set of shale shaker on bottom of desilter cyclone, it is installed in finner mesh screen for drying solids particles out of cyclone. The mesh size choose from API 140 to API 325 depending on drilling requirement. The desilter mud flow can be 500GPM to 1500GPM depending on cyclone quantity.

Features of APCN drilling fluids desilter

• 100% Polyurethane ( PU ) material to make desilter cones for longer lifespan.
• Clamp type for easy maintenance.
• Compact design with small footprint.
• Flexible options for 8, 10, 12, 16 or 20 pieces of 4" or 5" cones for different capacities.
• Flexible fast connection is available for user assembly.

Drilling fluids desilter for drilling mud

We are a China exporter of desilter and desander equipments for Indian, Russian,middle east.etc.Choose us as desilter supplier.Our factory and company are Quality Management System ISO 9001-2000 certified.Aipu Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy desilter from China manufacturer Aipu,good quality,best price.Your best hydrocyclone desilter for drilling mud circulation system.

Application of drilling fluids desilter

APCN series desilter is the third phase solids control equipments in well drilling mud system

Drilling fluids desilter separators are one of the important equipment of controlling the solids in the drill fluid. The action is to remove the harmful solids, promote the drill fluid performance and separate 15～47 μm solids particles accounting for over 60% of solids quantity.When the quick drilling is made in the soft formation, the shale shaker only can remove large solids particles, but the Hydrocylone Desilter separators can remove fine solids particles, fully promoting the solids control efficiency. Therefore, it is especially suitable for the well site where the formation is considerable hard and the drilling speed is slower so that the cuttings is very fine in particle size.
As different treating capacity , you can choose the number of cyclone . Normally speaking , 8 no. of cyclone is availeble , and you can choose 10 , 12 , 14, 16, 18, 20 according to your requirement.

 For any question or demand, just feel free to contact AIPU solids. You will get a professional proposal very soon.