Beijing Sinovo International & Sinovo Heavy Industry Co.Ltd. |
Verified Suppliers
|
Fully Hydraulic Breaker SPF400C For Pile Diameter 200-300mm
The leading hydraulic pile breaker with five patented technologies and adjustable chain, it is the most efficient equipment to break the foundation plies. Due to the modular design the pile breaker can be used for breaking different sizes of piles. Equipped with the chains. it can work with different equipment to break piles.
The SPF400C hydraulic pile breaker has the following features:
easy operation, high efficiency, low cost, less noise, more
safty and steadibility. It imposes no impact force on the
parent body of the pile and no influence on the bearing
capacity of the pile, and shortens the construction period
greatly. It is applicable for pile-group works and is
recommended strongly by the construction department
and the supervisiondepartment.
1.Environment-friendly: Its full hydraulic drive causes
little noises during operation and no influence on the
surrounding environments.
2. Low-cost : The operating system is easy and convenient.Fewer
operating workers are required to save cost for labor and
machines maintenance during construction.
3. Multi-function: Module generalization is realized with
our SPF400C square pile machine. It can be used for both
circular piles and square piles by changing the module
combination.
4. Small volume: It's light for convenient transportation.
5. Safety: Contact-free operation is enabled and it can beapplied
for construction on complex land form.
6. Universal property: It can be driven by diverse
power sources and is compatible with excavators or
hydraulic system according to the construction sites
conditions. It is flexible to connect multiple construction
machines with universal and economical performance. The
telescopic sling lifting chains meet the requirements of
various landforms.
7. Long service life: It is made of military material by firstclass
suppliers with reliable quality, extending its service life.
8. Convenience: It's small for transportation. Replaceable and
changeable module combination makes its applicable for piles with various diameters. The
modules can be assembled and disassembled easily and
conveniently.
Operation steps (Apply to all Pile Breakers)
1. According to pile diameter, with reference to
the construction reference parameters corresponding to
the number of modules, directly connect the breakers to the
work platform with a quick coupler;
2. The working platform can be excavator, lifting device
and hydraulic pump station combination, the lifting device can
be truck crane, crawler cranes, etc;
3. Move the pile breaker to the working pile head section;
4. Adjust the pile breaker to the suitable height (please refer to
construction parameter list when crushing the pile,otherwise the
chain may be broken), and clamp the pile position to be cut;
5. Adjust the excavator's system pressure according to
the concrete strength, and pressurize the cylinder until
the concrete pile breaks under high pressure;
6. After the pile is crushed, hoist the concrete block;
7. Move the crushed pile to the designated position.
Specification
Model | SPF400C |
Range of pile diameter(mm) | 200-300mm |
Maximum Drill rod pressure | 470kN |
Maximum stroke of hydraulic cylinder | 135mm |
Maximum pressure of hydraulic cylinder | 31.5MPa |
Maximum flow of single cylinder | 20L/min |
Cut the number of pile/8h | 160 |
Height for cutting pile each time | ≦300 mm |
Supporting the digging machine Tonnage(excavator) | ≧7 t |