Active Member
|
[China]
Contact name:Emily
Kondasin International Co.,Ltd. |
|
|
Full Hydraulic Core Drill Rig , Underground Drill Rig Long Feeding Stroke
YDX-600 Core Drilling Rig, which is one kind of full hydraulic drive power head model drilling rig, can be applied
for small diamond drilling of metal or nonmetal solid mining exploration. It can be used to do large metal borehole. It make
possible to borehole from vertical to horizontal. It also can be used to borehole for exploration of hydrology or petroleum and
natural gas field.
It has a wide range of rotary speed which can be changed from high to low steplessly,and is suitable for various drilling methods such as carbide bit drilling and diamond bit drilling etc.
Rig has a long feeding stroke which can reduce the assistant time of adding drill rods and avoid block during the core drilling work. Thus, the efficiency will be advanced.
| Power Head Full Hydraulic Drilling Rig | YDX-600L | |
| Total Weight | kg | 5200 |
| Overall Dimension (Reduce Type) Length×Width×Height | mm | 5600×2200×2400 |
| Ambient Temperature Range | °C | -10～38 |
| Nominal Drilling Depth | m | 600 500 300 | ||
| Drill Rod Standard | mm | BQ | NQ | HQ |
| Drilling Hole Angle Range | Degree (°) | -90～0 | ||
| Power Head | Rotary Speed rpm | Output Torque N.m |
| Ⅰ | 94～135 | 3200～2040 |
| Ⅱ | 203～289 | 1490～955 |
| Ⅲ | 310～441 | 979～625 |
| Ⅳ | 663～945 | 457～292 |
| Stroke of Power Head | ||
| Feeding | mm | 3500 |
| Thrust Force | kN | 40 |
| Lifting Capacity | kN | 58 |
| Hydraulic Winch | Lifting Capability (1st Level Single Wire) | ||
| Main Winch (Lifting Drill Rod) | Max Lifting Ability | kN | 55 |
| Hoisting Speed | m/s | 0.45 | |
| Assistant Winch (Wire-line Coring) | Max Lifting Ability | kN | 12 |
| Hoisting Speed | m/s | 2.45 | |
| Mast | ||
| Sliding Distance | mm | 800 |
| Engine (CUMMINS Diesel) | Model | 6BT5.9-C125 |
| Power | kW | 125 |
| Rotate Speed | rpm | 2000 |
| Hydraulic Pump | ||
| Main Pump Displacement | ml/r | 45 |
| Middle Pump Displacement | ml/r | 28 |
| Small Pump Displacement | ml/r | 14 |
| Max. Pressure | Mpa | 27 |
1. Full hydraulic control, convenient and flexible operation,
convenient shifting, good ability, saving time and effort.
2. Machine has a higher rotary speed and a felicitous speed range
which has multi steps and large torque in low speed. It can be
applied for small diamond bit core drilling, satisfied for the
large diameter carbide bit core drilling and so on.
3. It is no necessary to have a slope tower when drilling a slope hole. It can lift the drill rod in one time.
4. The track chassis make it possible to move by oneself. It is so convenient and quick that the preparing time can be enormously shortened.
5. All the equipments of this rig are installed on chassis droved by diesel power engine.
