Industrial Mobile Wireless Remote Control Electric 2 Ton Jib Crane
Product Description
Industrial Mobile Wireless Remote Control Electric 2 Ton Jib Crane
is a lifting device used with chain hoists and CD electric hoists.
It has the characteristics of simple operation, reliable operation
and convenient maintenance. Widely use the upper and lower
materials of the user's workshop machine and the process, the
workpiece lifting of the production line and other occasions.
Code of practice for jib crane
- Before starting the cantilever crane, please carefully check
whether the mechanical equipment, electrical parts and protective
safety devices are intact and reliable. If the crane controller,
brake, limiter, bell, emergency switch and other main accessories
fail, it is strictly prohibited to lift the weight.
- must obey the signal man's command, but for the emergency stop
signal given by anyone, should stop immediately.
- the driver must confirm the command signal before the operation,
should start the bell.
- when close to the winch limit, car close to the terminal or
adjacent to the car encounter, the speed should be slow. The crane
is not allowed to use reverse instead of brake, stop switch instead
of limit, emergency switch instead of ordinary switch.
- Walk and get up and down on designated safe corridors, special
platforms or escalators. It is not allowed to walk on both sides of
the track except for maintenance. It is forbidden to walk on the
trolley track. Do not cross from one crane to another.
- When the work stops, do not hang heavy objects in the air. During
operation, the bell should sound when the ground is manned or the
lifting part is dropped. It is forbidden to cross the person's
head. Objects shall not be lifted too high from the ground.
- two gantry crane lifting a thing at the same time, to obey the
command, in step.
- During operation, a certain distance should be kept between the
bridge crane and the bridge crane.
- Maintenance bridge crane should lean against a safe place, cut off
the power supply, and hang up the warning sign of "no and gate".
The ground should be fenced and "no access" signs hung.
- When lifting heavy tonnage objects, it is necessary to lift them
slightly off the ground to make sure that the gantry crane has
stable hanging and good braking, and then raise them and run
slowly. Do not operate three control handles at the same time.
Package & Delivery