Home Companies Saint Best Group Limited

Double Glazing Silicone Sealant For Processing Insulating Glass

Active Member

Contact Us

[China]

Address: Hi Tech Industrial Zone,Jinan,China

Contact name:Shawn

Saint Best Group Limited

Double Glazing Silicone Sealant For Processing Insulating Glass

Country/Region	china
City & Province	jinan shandong
Categories	Adhesives & Sealants

Product Details

Silicone Insulating Glass Sealant,Silicone Sealant,Double Glazing Silicone Sealant,Insulating Glass Silicone Sealant

SBT-882 Silicone Insulating Glass Sealant,Insulating Glass Silicone Sealant,Silicone Sealant

1. special for the secondary seal of insulating glass units used for window and door etc.

Features

1. Two part, neutral fast cure rate, suitable for factory application

2. High level of tensile strength and mechanical properties

3. Excellent adhesion to a wide range of substrates including coated glass, low -E glass, tempered glass, laminated glass, aluminum and steel spacers etc.

4. Excellent weatherability and high resistance to ultra-violet radiation ,heat and humidity, and ozone

5. Excellent resistance to temperature extremes, unaffected performance from –50 ℃ to +150 ℃

6. Excellent unprimed adhesion to wide range of substrates Good compatibility with other neutral silicone sealants

COLOURS

Part A (base) of SBT-882 is available in white, part B (curing agent) in black, black color after mixing.

PACKAGING

SBT-882 is available in kit: part A in 200L drums (net 180L), part B in 20L pails (net 18L).

SPECIFICATIONS

SBT-882 is designed to meet or even exceed the requirements of

l Chinese corporate specification Q/71304249-7.004-2009

Typical properties

These values are not intended for use in preparing specifications.

GB: Chinese National Standard

ASTM: American Society for Testing and Materials

ISO: International Standardization Organization

The “GB” testing method is equivalent or partly equivalent to that in the “()”

Test Method	Property	Unit	Standard	Result
GB/T 13477 (ISO 7390)	Slump	mm	≤3	0
GB/T 13477 (ISO 9048)	Working time (after 20 min.)	s	≤10	1.4
GB/T 13477(ASTM D 2377)	Tack free time	h	≤3	1.0
GB/T 531.1 (ISO 7619 ) 53113477	Hardness	Shore A	30～60	47

GB/T 13477 (ISO 8339)	Tensile strength	MPa	≥0.6	1.2
GB 16776	Adhesion failure	%	≤10	0
GB 16776 (ASTM C 792)	Heat aging
	weight loss	%	≤10	4.5
	chalking		Nil	Nil
	cracking		Nil	Nil

STORAGE AND SHELF LIFE

SBT-882 should be stored at or below 27℃ in original unopened containers. It has a shelf life of 12 months from the date of manufacture.

LIMITATIONS

SBT-882 should not be applied:

l For structural glazing

l To the materials that bleed oils , plasticizers or solvents, such as impregnated wood, oil-based caulks

l To frost laden or damp surfaces

l For continuous water immersion

When surface temperature below 4℃ or over 50℃

HOW TO USE

Surface Preparation

Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

Mixing and Dispensing

To obtain the optimal performance of SBT-882, it is recommended that base and curing agent thoroughly mixed using a two-part silicone dispensing machine.

SBT-882 should be mixed at a ratio of 9:1～11:1 base to curing agent by volume, or 11:1～13:1base to curing agent by weight for optimal performance.

Lot matching of SBT- 882 base to curing agent is not required. Before use, it is recommended that curing agent be stirred to ensure the homogeneity of all components.

SBT-882 part B curing agent will react with atmospheric moisture, therefore should not be exposed to air for prolonged periods of time.

Two-Component Silicone Insulating Glass Sealant

Silicone Insulating Glass Sealant,Two-Component Silicone Insulating Glass Sealant
Use:The second sealant of insulating glass(external seal),mainly used for processing insulating glass and other uses.
Feature:
(1) Use manual mixing adhesive in construction with neutral solidification,non-corrosiveness to such constructional materials as metal,coated glass,concrete,marble,granite and other materials.
(2) When solidifying,the low molecular weight substances release,without irritating odor.
(3) Outstanding resistance to climate aging performance,resistance to ultraviolet,rays, resistance to ozone and resistance to water.
(4) Outstanding resistance to Low and high temperature performance has little change within the temperature range of -50-150℃.
(5) It has good compatibility like other neutral siliconer gel,but need to receive compatibility test before the use.
Color:A is white,B is black and A/B is dark gray after mixture.Mixing ratio:A:B=10:1(weight ratio).
Package:A:190l iron barrel .B:19L Plastic barrel.(special two part pump)
A:19l plastic B:2lplastic tube(manually)