Active Member
|
[China]
Address: NO11,Changchun Road, Hi-tech Zone Zhengzhou,China
Contact name:doritdental
Henan Dorit Biotechnology Co., Ltd. |
|
|
Dorit Ceramic Bearing 20: 1 Implant Fiber Optic Contra Angle Dental Handpiece
20: 1 Implant Fiber Optic handpeice technical data
| Product name | 20: 1 Implant Fiber Optic handpeice |
Gear ratior | 20:1 |
Maximum speed | 0-2500rpm |
Max torque | 65 N·cm |
Working air pressure | 0.3~0.35Mpa |
Noise | ≤50db |
Bur applicable | Φ2.33~2.35mm |
Water irrigation | Internal and external irrigation |
Features
Fiber optic light, stable light source |
internal and external water spary |
Push button chuck system, reduce working time |
Max toqrue: 65N.cm Matisfy the force for implanting teeth |
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
Operation Instruction:
It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.
