Disposable medical infusion pump CBI 200ml for painless parturition

-Intraoperative anesthesia continuous administration of Infusion pump

1. Product description

The infusion pump adopts imported silica gel tube and advanced flow control technology. Consisting of press pump, flow rate controller, and connective catheters. It is flowing rate stable, flexible, resistive to any electromagnetic interference etc.

This model has two-way valve, it is used for infusion, and you can draw the remaining part back.

Applications: 

1. General anesthesia intravenous anesthesia maintenance medication

It is especially suitable for continuous intravenous infusion of intravenous anesthetics such as propofol, fentanyl, remifentanil and etomidate.

2. Continuous epidural anesthesia continuous injection

The main advantages are stable anesthesia block, stable blood concentration, little effect on the circulatory system and respiratory system, and effectively reduce postoperative complications.

3. Painless childbirth

Can effectively alleviate the pain of the mother during natural childbirth

This model STT19-CBI-200-4/6 is for painless childbirth/ painless delivery/ painless labor, it is flow fixed pump for continous injection.

Optional models: 

Epidural labor analgesia solutions STT19-CBI-200-4/6 (only for reference, to be decided by doctor and anesthetist)

Recommended drug formula
Drug selection principle: At low concentrations, there are local anesthetics with obvious characteristics of "sensory-motor block separation". The preferred local anesthetic drug is ropivacaine
Formulation One 0.06-0.1% ropivacaine + 2 μg/ml fentanyl (preparation: 1% ropivacaine 10 ml + 100 μg / fentanyl 2 + 120 ml saline)
Formulation 2 0.06-0.1% ropivacaine +0.4 μg/ml sufentanil (preparation: 1% ropivacaine 10 ml + 50 μg sufentanil + normal saline 120 ml)
Anesthesia and method of administration
After the occurrence of regular contractions, epidural puncture can be performed in the L3-4 gap. After the epidural, the test volume of 1% lidocaine 5ml or 3% chloroprocaine 3ml is injected first.
False into the blood vessel positive: short-term one-time tinnitus, numb lips, metallic taste
Into the subarachnoid positive: lower limb muscle strength is below III/V within 3 minutes
Head to the epidural catheter 3-4cm, give the above liquid 10-15ml (fraction, 5ml / time, observe the anesthetic effect after catheterization) to establish an analgesia plane (below T10)
The epidural catheter is then connected to a pain-free delivery pump with the above liquid solution, and the continuous infusion volume is 6-10 ml/h.

Attention

* The pump is sterilized and one-off application, not be sterilized used again.

* It should be destroyed immediately after used.

The speed is surveyed in the temperature of 30℃ and inject liquid is physiological saline The flow rate may vary along of medicine type, liquid viscosity and temperature condition.

The pump should be place within ±20cm at the injected part of patient. Otherwise, the flow rate will be increased.

* When the last medication in the pump is less than 10ml, the flow rate will be reduced obviously.

* Do not inject the medication over the pump’s Maximum Capacity

* The injector and the epidural crunode must match the nation standard

* After injected medication, perhaps there are air bubbles in the reservoir, it will disappear themselves within 3 hours.

* Do not forget to cover the injected port with the dust-proof cap after injected medication

* Do not use if find the next cases

a. The packaging has been opened or damaged

b. Parts lack

c. Parts damaged

* Storage condition: dry, ventilated and room temperature within 5~40°C

* The pump is valid for two years and the production date is indicated on the packing port

2. Packing and delivery

100pcs/carton, can be deliver by air, courier and sea.

3. Factory

4. Certificate

5. Why us

We do serious to take care of your order and value every inquiry sent to us ,ensure quick competitive price .

Punctual deliver time :

--we put your order and deal immediately ,ensure your punctual deliver time

Check before ship :

--our inspection colleagues check the quality before pack to ship ,we do shipping notice as soon as your order is shipped

After sales service :

we welcome your enquiry about the goods ,and respect your feedback after receive the goods.