Active Member
|
[China]
Address: Floor 4,No.31,Yangmei Road,Yangmei Community,Bantian street,Longgang District,shenzhen,China
Contact name:Liu Yu
Shenzhen Vians Electric Lock Co.,Ltd. |
|
|
UL Waterproof Electromagnetic Door Lock 1200lbs for Outside Door
Product Overview
An magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate used for access control system.
Specification
| Product Parameter | Parameter Description |
| Size | 240L*63.5W*43H(mm) |
| Armature Plate Dimension | 185L*60W*13H(mm) |
| Holding Force | 500kg(1200Lbs) |
| Input Voltage | 12 or 24VDC |
| Current | 12V/460mA or 24V/220mA |
| signal output | YES |
| Operating Temp | -10~+55℃(14-131F) |
| Humidity | 0~90%(non-condensing) |
| Cover Finish | Anodized aluminum |
| Lock Finish | Zinc |
| Armature Plate Finish | Zinc |
| Weight | 4.5KG |
Feature
Installation drawing
Product mounting bracket
Wiring
Trade show
Electromagnetic Lock Trouble and Shooting
| Troubles | Cause | Shooting |
| Door cannot lock | 1. Circuitry malfunction or low voltage. 2. The power supply wire is too thin and long to cause big decrease of voltage. 3. Power supply is broken to cause no voltage output. 4. The positive and negative wire of power supply is connected in reverse. 5. The electromagnetic lock no power input. | 1. Check the connection, and measure the voltage to see if it is normal. 2. Modify or change the power supply wire into thicker one. 3. Check the power polarity and correct the connection. 4. Check to see if power supply or controller is correctly connected to NC.Make sure to see up the controller correctly. |
| No transform of indicator output with low holding force. | 1. The mount plate and the electromagnetic lock face not in complete close. 2. The mount plate is fixed to tight, no room to move. 3. The electromagnetic lock and the mounting plate not at same level for case the door is deformed or moved. 4. The surface of mount plate or electromagnetic lock is not clear. 5. The power supply with lower power. 6. The power supply wire is too thin and long. 7. The electromagnetic lock is malfunction.
| 1. Check the face of mount plate or electromagnetic lock, if the face of plate is deformed to cause no complete close to the lock, please change the plate. 2. Check if the rubber gasket is put into the stick of plate, and adjusts the bolt of plates not too tight at least a little movable. 3. Adjust the mount plate and electromagnetic lock to be level at each other and close completely. 4. Clean the surface of lock and plate, if rusted to cause no working please change the part. 5. Use millimeter to check the voltage and current of electromagnetic lock to see if it is normal, or need repairing or changing power supply. 6. Change into high quality power supply wire, better no more the 20 meters. 7. Repair or change the electromagnetic lock. |
| Door cannot open | The power is not cut off | To check out the connection of power supply and controller, the electromagnetic lock is power-on locking power-off opening type. The lock can be open once power off. |
Why Choose Us?
FAQ
Q:How do I pay for my purchase?
A: we accept the following payment methods: cridet card;
moneybooker;T/T;.
Q:How much does it cost to ship to my country?
A:Please tell us your receive goods address, we will check the
shipping cost for your reference
Q:Is there any tracking Number for my item?
A: Yes, we ship every order with their Tracking Number, and you can view the shipment staus on the corresponding website.
Q:Does this product come with retail package?
A: We have declared the packing detail on the description of each product, please check it, thank you!
Q:I am a reseller,I would like to buy many pieces of your item, what's the wholesale price?
A: Hi,thanks for your inquiry, if you would like to buy large quantity, please send email to us, we will give you the best price, thanks!
