DONJOY TECHNOLOGY CO., LTD |
Verified Suppliers
|
|
5.0-7.0 Bar intelligent valve positioner Device Net BUS Control CE
/ ISO / FDA
SPECIFICATION
Product Name | Intelligent valve positioner |
Power | DC. 24V |
Pneumatic pressure | 5.0-7.0 bar |
Connector | G1/8" |
Level of protection | IP67 |
Standard function | 0/4 - 20mA to 0 - 5/10V signal input |
Optional function | 0/4 - 20mA position feedback output |
Optional function | Device Net BUS Control |
Certificate | 3A/54-02 (1580), PED/97/23/EC, FDA.177.2600, ISO |
Delivery details | Usually within 20 days after receiving T/T down payment. |
Applications
The controller (IL - TOP) is mainly used in the systems of
all kinds of fluid process control and flow control.
IL - TOP could be installed to all kinds of actuators
in linear motion, such as pneumatic angle seat valve,
diaphragm valve, butterfly valve, globe valve and ball valve etc.
which are the valves for regulating flow.
IL - TOP could be installed to actuators easily which are
suitable for the situation of high purity.
Feature
0/4 - 20mA to 0 - 5/10V signal input (standard)
0/4 - 20mA position feedback output (optional)
Device Net BUS control (optional)
Linear motion / Rotary motion actuator (optional)
Power: DC.24V
Pneumatic pressure: 5.0-7.0 bar
Connector: G1/8"
Level of protection: IP67
Technical features
The control could be uses as a positioner or process controller.
As a positioner, it could set the valve position according to
set point.
As a process controller, MPU will be received the signal from
control by comparing setting position value of valve with actual
position of valve, through PIC control algorithm, process
controller will drive the valve to the exact target positioner of
valve.
The controller is composed of MPU, detection unit by
controlling signal, position detector, LCD display, keyboard and
piezoelectric valve etc..
Installation
It's very simple install the controller and actuator, and the
display position of LCD could be adjusted.
To take the transparent cover down in anticlockwise
direction, and then:
To operate keyboard, to loosen the base and 2 screws by
using M5 wrench;
To rotate it easily and adjust it to the display
direction you would like, and to re-tighten the 2 screws by
wrench;
To loosen terminal box, to take down the 4 screws and open
the box, and to operate according to connection diagram.
(Non-professional is prohibited to operate.)
It needs connector to combine the controller with
actuator.
Order information
Model | Features | Position feedback | Description |
IL-TOP-001-M | Positioner + Process control | 4 - 20mA / 0 - 5 / 10V | Single-acting |
IL-TOP-002-M | Positioner + Process control | 4 - 20mA / 0 - 5 / 10V | Double-acting |
IL-TOP-001 | Positioner + Process control | NO | Single-acting |
IL-TOP-002 | Positioner + Process control | NO | Double-acting |
IL-TOP-001-BUS | Positioner + Process control + BUS | Single-acting + BUS | |
IL-TOP-002-BUS | Positioner + Process control + BUS | Double-acting + BUS |