Monel Steel Nickel Alloy Strip Monel 400 Astm
- Monel Series
Monel 400 strip is producedby dlx alloy, which is with a wide range of Monel nickel-copper aloy 400 strip size. It is a kind of nickel-copper alloy that combines the excellent
corrosion resistance characteristic. Monel 400 is with the added advantage of greater
strength and hardness. These amplified properties, strength and
hardness, are obtained by adding aluminum and titanium to the
nickel-copper base and by a thermal processing used to effect
precipitation, typically called age hardening or aging.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface
of the material during processing. Aluminum and copper may be
selectively oxidized during heating, leaving a magnetic nickel rich
film on the outside. Pickling orbright dipping in acid can remove
this magnetic film and restore the non-magnetic properties.
Chemical Properties of Monel 400
Ni | Cu | C | Mn | Fe | S | Si |
63.0-70.0 | 28-34 | 0.3 max | 2 max | 2.5 max | 0.024 max | 0.50 max |
. Sour-gas service applications
. Oil and gas production safety lifts and valves
. Oil-well tools and instruments like drill collars
. Oil well industry
. Doctor blades and scrapers
. Chains, cables, springs, valve trim, fasteners for marine service
. Pump shafts and impellers in marine service