|
[China]
Trade Verify
Address: NO.32 West Taihu Road, Xinbei District, Changzhou, Jiangsu
Contact name:Jane
Changzhou DLX Alloy Co., Ltd. |
|
Verified Suppliers
|
|
|
NIMONIC alloy 75 Alloy 75 (UNS N06075, Nimonic 75) rod is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
The chemical composition of NIMONIC alloy 75 is given in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | Bal |
| Chromium, Cr | 19-21 |
| Iron, Fe | ≤5 |
| Cobalt, Co | ≤5 |
| Titanium, Ti | 0.2-0.5 |
| Aluminum, Al | ≤0.4 |
| Manganese,Mn | ≤1 |
| Others | Remainder |
The following table discusses the physical properties of NIMONIC alloy 75.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.37 gm/cm3 | 0.302 lb/in3 |
The mechanical properties of NIMONIC alloy 75 are tabulated below.
| Properties | ||||
|---|---|---|---|---|
| Condition | Approx. tensile strength | Approx. operating temperature depending on load** and environment | ||
| N/mm² | ksi | °C | °F | |
| Annealed | 700 – 800 | 102 – 116 | -200 to +1000 | -330 to +1830 |
| Spring Temper | 1200 – 1500 | 174 – 218 | -200 to +1000 | -330 to +1830 |
