2014 UNO R3 Development Arduino Controller Board Improved Version CH340G with USB Cable

2014 UNO R3 Development Board Improved Version CH340G with USB Cable

Product Introduction:

       The Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

        The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

        The Uno can be powered via the USB connection or with an external power supply. The power source is selected automatically.

         External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.

         The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.

Product Details:

MicrocontrollerATmega328
Operating Voltage : 5V

Input Voltage (recommended) : 7-12V

Input Voltage (limits) : 6-20V

Digital I/O Pins : 14(of which 6 provide PWM output)

Analog Input Pins : 6

DC Current per I/O Pin : 40 mA

DC Current for 3.3V Pin : 50 mA

Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader

SRAM : 2KB (ATmega328)

EEPROM : 1KB (ATmega328)

Clock Speed : 16MHz

1 About us:

1. More than 10 years business enable us accumulated much eperience in electronic components filed;

2. We ability to control and detect the quality,could make sure the quality ;

3. Lots of parts in our own store and in stock,Fast shipment is supported;

4. In our daily work Service for customer will be improved ;

5. submit all new electronic parts is our criterion;

6. Be your reliable supplier is our pursue

2 Service & Advantage:

1.Factory supply directly,can design,manufacture according to clients’ requirement.

2.Plenty stock can satisfy urgent requirement.And support small orders.

3. 2-3 years warranty.

4. 24 hours reply service.

3 If the products can’t work after receiving it,what should I do?
We will replace new items for you at once, and respect your final decision for wrong goods.

4 If the products don’t meet my demand after I received it,can I return it?
Yes,no problem.You can return back to us, we will refund your full payment.

5 Shipping method:

1.We will ship the items after the payment is reached;

2.We can ship to you by UPS/DHL/TNT/EMS/Fede. Pls contact us directly and we will use your preferred ways. For the Countries & Regions where EMS cannot deliver,pls choose other shipping ways;

3.Goods will be sent out soon,with 1-3 days;

4.We are not responsible for any accidents, delays or other issues that are the responsibility of the shipping service;

5.Any import fees or charges are the buyer's responsibility.