|
[China]
Trade Verify
Address: 101# Building, JLH605-B01 Greenland International Exp Center,Jiulong Road 1177,Honggutan District,Nanchang,Jiangxi,China
Contact name:Terysa
Nanchang YiLi Medical Instrument Co.,LTD |
|
Verified Suppliers
|
|
|
Medical Dispoable Insulin pen needle 32G 4mm 0.23mm 5 Bevels
Product Introduction:
1. Easy to use
2. Single use only, disposable device
3. Safety to handle
4. Easy to read numbers
5. Thin, Fine, Sharp
6. Extra lubricated needle, providers greater comfort
7. Compatible with all available pen models
8. Optimum treatment with maximum simplicity
9. Sterile,Non-toxic,Non-pyrogenic
10.Double point system
11.Patient Point with triple beveling for easy and atraumatic
12.Cartridge point sharpened for a perfect punch with no
fragmentation
13.Easy flow of medication without any impurities
Size:
Needle Size | Needle Length | Package | G.W(Kg) | N.W(Kg) | ||
pcs/box | box/carton | |||||
33G | 0.2mm | 4mm | 100pcs | 6.550 | 6.3 | 4.5 |
32G | 0.2mm | 4mm | 6.3 | 4.5 | ||
5mm | 6.3 | 4.5 | ||||
6mm | 6.3 | 4.5 | ||||
31G | 0.25mm | 4mm | 6.3 | 4.5 | ||
5mm | 6.3 | 4.5 | ||||
6mm | 6.5 | 4.8 | ||||
8mm | 6.5 | 4.8 | ||||
30G | 0.30 | 8mm | 4.8 | 4.8 | ||
Product photo:
Do not litter discarded insulin needles:
The syringe and injection needle after injection are both medical
contaminated sharps, and improper handling can not only harm others
but also cause certain environmental pollution.
Therefore, after the needle is pulled out, it should be immediately
removed from the injection pen, and the needle or syringe should be
placed in a dedicated waste container before being discarded. If
there is no dedicated waste container, it can be replaced with a
covered hard shell container or a container that will not be
punctured by a needle.
FAQ:
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing more than 9 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in Nanchang city,Jiangxi Province,China.
It is about more than 4 hours from Shanghai airport, We can pick you up if you need, welcome to visit our factory.
3.Q:What is the material for your products?
A: The material is medical grade PVC/pp/Latex/silicone/Stainless Steel
4.Q:Can you make samples?
A: Yes, we can make samples for you.
5.Q:How does your factory do as quality control?
A: Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.
6.Q: How is your after sale?
A: 1.If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.
7.Q: What is the monthly production capacity?
A: Can produce 20000000 units per month.
