CE FFP1 Save Mask ,Particulate Respirator Mask , Disposable Face
Mask,Non Woven Fabric
1 . Descriptions
Our N95 FFP1 particulate breathing system is made of non-woven
fabric, which allows smooth breathing and reduces heat and moisture
accumulation.
A comfortable elastic ring with no pressure on the ears, a size
FFP1 mask fits most faces.
Filters non-toxic dust, pollen, dander, sawdust, garage dust,
garden and general household dust and irritants. They are
lightweight and breathable and can easily be doubled for extra
protection.
Adjustable nose clips help provide a secure seal and prevent
contaminated air from entering. Cushioning foam increases nose
comfort.
▶ This dust mask is suitable for men and women, suitable for
cycling, camping, running, traveling, mountain climbing and daily
use.
2 . Expiry date and packing
If maintained as per storage instructions , products can be used up
to 5 years from date of manufacture.
The package of this cup mask with valve is 20pcs/box , 20box/carton and the size of the carton is 64.5*54*27cm.
3 . Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on Personal
Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment procedure based on
internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under
surveillance of BSI , notified body n°0086.
4 . Directions for use
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
peformance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
5 . Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids
loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the
reliability / regularity of the production and the control of the
environmental impact.
6 . More pictures