The wide range of available functions and interfaces, make it
suitable for multiple industrial and commercial weighing
applications, such as floor scales, mobile weighing, etc.
We have different types of weigh indicator, depend on the extend
function there are Basic version, Pro version and Ex-version for
explosion and flammable environment.
We even have some digital weighing indicators are specially used
for industrial control of quantitative feeding, material
reduction and batching control. With analog voltage and current
output function, using 16-bit D / A converter, with RS232 / RS485
serial communication interface, large screen interface, relay
output interface, aluminum alloy shell, can be easily embedded in
the control cabinet, and all the above interfaces In addition to
electrical isolation, multiple control methods (such as feed
control, reduction control, 4 material batching, etc.) are
applicable to industries such as cement, chemical industry and
metallurgy.
MAIN FEATURES:
5/17-key functional waterproof keypad, with indication for quick
access to main functions and regulations.
LCD 25mm backlit display with 6 high contrast digits and icons for
indication of active functions.
Waterproof IP68 STAINLESS STEEL case, with sealed rubber gasket,
easy to clean and resistant in harsh and corrosive environments.
Dimensions in mm: 243x145x78,4 mm.
Suitable for use on the table, column, or wall.
A/D 24 bit converter, 4 channels, up to 200 conv./sec. autoselect
and up to 8 signal linearisation points.
Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in CE-M approved
version for legal for trade use.
Up to 1.000.000 displayable divisions with built-in resolution up
to 3.000.000 points.
Connection with up to 8 load cells with input resistance equal to
350 Ohm or up to 16 cells of 700 Ohm each.
Digital calibration and set-up from keypad or from PC with
DINITOOLS.
Power supply 110-240 Vac.
I/O SECTION
RS232/C port configurable for connection with printer/labeller, or
for attached printer.
RS232/C (or optionally RS485) bi-directional port configurable for
PC, PLC, remote display, and radio modem.
Quick RJ RS232 plug connection.
KEYBOARD FUNCTIONS
Zeroing, Automatic tare, Presettable tare, printing and/or data
transmission, selectable function command, on/off switching,
backlit setting, function mode quick selection, user menu.
MASTER/REPEATER OPTION
Specific program (MSTSLV code) for use of the indicator as a
universal weight repeater or as a multi-scale repeater (MASTER) in
combination with DFW/DGT/MCW.
FUNCTIONING MODES:
Multi-scale repeater (MASTER):
function which allows to repeat up to 32 independent scales, with
the possibility of managing their functions, or displaying and
printing the sum of the weighs of all the scales.
UNIVERSAL weight repeater:
function which allows to repeat the weight of any scales, through
the configuration of the input string.
AVAILABLE FUNCTIONS FROM REMOTE CONTROL
Radiofrequency 6-key remote control: zero, tare, enable / disable
function, print, switch-off.
SELECTABLE FUNCTION MODES
The user can select the operating modes directly using the
dedicated key*:
- High resolution display x 10
- Precision weighing with temporary recalibration via a sample
weight (for internal factory use)
- Net/Gross
- Newton to Kg converter
- Lb to Kg converter
- Free conversion factor (for meter and litre counters etc.)
- Weight totalizer
- Formulizer
- +/- controller with quick target and threshold input
- Percentage weighing
- Percentage batching with programmable target
- Piece counter
- Hold
- Two-speed filling/batching with reset upon starting (with
optional DFIO)
The “alibi memory” and “setpoint” functions are available in
combination with the required operating mode and they are activated
automatically when installing the relevant optional board.
Optional functions:
- PEAK, detection of weight peaks (code DFWPK)
- Newton to Kg converter (code DFWPK)
Access to the user menu is gained using the dedicated key* to
adjust the weighing filter, date and time, setpoint and tare
weight, which the user can access by entering a programmable access
password.
* These quick access keys to the menus can be blocked by
configuring a dedicated password.
MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)
OIML R76