industrial 12 LEDs 20 Digits cardinal indicator for table/panel
mounting
A/D conversion with readability 1/30000
- Use inner code to replace weight observing and analysis tolerance
- Software to strength anti-vibration ability
- Zero-tracking, Zero range setup (auto/manual)
- Setup digital filter intensity, range and stable time
- Counting function with unit data save protection in case of power
off
- Alarm for low battery and auto power off when low battery
MAIN FEATURES
20-key numeric/functional waterproof keyboard: quick entry of the
setpoints and the tare value.
Highly efficient red LED display with 6 20-mm digits and 12 LEDs
for showing active functions.
Stainless steel case for panel mounting.
Frontal panel in alluminium, with protection gasket.
Front panel dimensions: 170x170mm.
Drill template: 161x162mm.
Fitted with bracket for use on table or wall mounting. A/D 24-bit
sigma-delta conversion, up to 200 conv./sec. autoselect.
Connectable with up to 16 analogue load cells with 350 Ohm input
resistance.
Up to 1.000.000 displayable divisions with internal resolution up
to 3.000.000 points.
Management of a digitally equalised 4-cell weighing system or
management of 4 independent weighing systems.
Calibration, Set-Up parameters, configurable from keyboard or from
PC with DINITOOLS.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
Time/Date
From 12 Vdc to 24 Vdc power supply.
MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)
OIML R76
OIML R61 - MID
OIML R51
TRANSMITTER / INDICATOR: FUNCTIONS
THROUGH KEYBOARD:
Zeroing; Semi automatic and presettable tare, print and/or data
transmission; ON/Stand-by.
Quick entry of the setpoints and the tare values.
SELECTABLE:
High Resolution Weighing x 10; Net/Gross or lb/kg conversion;
Weighs totalisation; Formulation; Counting; In/Out Truck weighing;
Hold e Peak.
EXTERNAL INPUT:
Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT:
Set Point Control on the weight, either positive (in loading) or
negative (in unloading), or on the pieces (counting mode), with
programmable enabling/disabling thresholds, as direct check or upon
weight stability.
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights;
Clearing; Semi automatic and presettable tare; Scale switch;
Setting of outputs activation thresholds.
DGTPKV2 and DGTPKANV2 models: Reading of microvolts or ADC
converter for all the channels; Message display; Printing; Setting
of APW in counting mode; Simulation of key pressure; MODBUS serial
protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGTPKANV2):
Analogue output proportional to the net or gross weight, either
positive (in loading) or negative (in unloading).
MASTER/REPEATER OPTION (MSTSLV code)
Specific programme for use of the indicator as a universal weight
repeater or as a multi-scale repeater (MASTER) in combination with
DFW/DGT/MCW.
FUNCTIONING MODES:
Multi-scale repeater (MASTER):
function which allows to repeat up to 32 independent scales, with
the possibility of managing their functions, or displaying and
printing the sum of the weighs of all the scales.
UNIVERSAL weight repeater:
function which allows to repeat the weight of any scales, through
the configuration of the input string.
Click to learn more.
I/O SECTION
1 RS232/C or RS485 bidirectional port configurable for connection
to PC or external units.
1 RS232/C bidirectional port configurable for connection to
printer.
PROFIBUS serial interface (DGTPKPBV2 model).
6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with
configurable functions.
4 optoisolator photocouplers inputs: 12÷24 Vdc, 5 mA min - 20 mA
max, with configurable functions.
16-bit analogue output (DGTPKANV2 model) 4-20mA / 0-5Vdc / 0-10Vdc
at choice. Maximum load applicable on the output current: 350Ohm.
Minimum load applicable on the output voltage: 10kOhm.