Multipurpose weight indicator/transmitter for panel mounting, 4
dependent or independent channels for direct reading and
diagnostics of each connected load cell. The wide range of
available interfaces, makes it easy to integrate the weighing with
any automation system.
MAIN CERTIFICATIONS
EU Type Examination Certificate (45501:2015)
OIML R76
OIML R61 - MID
OIML R51
I/O SECTION
1 RS232/C or RS485 bidirectional port configurable for connection
to PC or external units.
1 RS232/C bidirectional port configurable for connection to
printer.
Six 150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs
configurable according to the selected dosage function.
Four 12÷24 Vdc, 5 mA min - 20 mA max inputs (optoisolator
photocouplers) with functions dependent on the selected dosage
function.
Analogue 16 bit output (only for DGTPFAN model), configurable as
4-20mA, 0-5Vdc or 0-10Vdc. Maximum load applicable on the output
current: 350Ohm. Minimum load applicable on the output voltage:
10kOhm.
MAIN FEATURES
Easy to use 5-key waterproof keyboard.
Highly efficient red LED display with 6 20-mm digits and 6 LEDs for
showing active functions.
Case for panel mounting. Dimensions: 143,5 x 72 x 129mm(lxhxw).
Drill template: 136,5 x 67,5 x 140mm (lxhxw).
A/D 24-bit sigma-delta conversion with 4 channels, up to 200
conv./sec. autoselect.
Management of a weighing system from 1 to 4 channels (cells) with
digital equalization.
Connectable with up to 16 analogue load cells with 350 Ohm input
resistance.
Up to 1.000.000 displayable divisions with internal resolution up
to 3.000.000 points.
Calibration, Set-Up parameters, configurable from keyboard or PC
with Dinitools.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
Time Date.
Memory back-up for recording dosage data in case it’s accidentally
turned off.
Printing the dosage and consumption data.
From 12 Vdc to 24 Vdc power supply.
