Ours ultrasonic Co.,Ltd |
|
Car / Motor / Truck Wash Rinse Dry Ultrasonic Parts Cleaner Multi Tank Industrial Ultrasonic Cleaner
What is the working principle of the multi tank ultrasonic cleaner? Next, I will introduce the main links and steps of its work, the principle and knowledge of how the multi groove ultrasonic cleaner works. The principle of the ultrasonic cleaning machine is to convert the transducer, the sound energy of the power ultrasonic frequency source, into mechanical vibration, and to radiate the cleaning liquid in the tank to the ultrasonic through cleaning the tank wall. Because of the ultrasonic radiation, the microbubbles in the liquid can keep vibration under the action of the acoustic wave.
When the sound pressure or intensity reaches a certain degree, the
bubble will expand rapidly, and then suddenly close. In this
process, the shock wave is generated at the moment when the bubble
is closed, and the pressure and local temperature of 1012-1013pa
are generated around the bubble. The huge pressure generated by the
ultrasonic cavitation can destroy the insoluble dirt and make them
differentiate into solutions. The direct counter impact of the
steam cavitation on the dirt.
On the one hand, it can destroy the adsorption of the dirt and the
surface of the cleaning part, on the other hand, it can cause the
fatigue damage of the dirt layer and be removed. The vibration of
the gas bubble will scrub the solid surface. Once the dirt layer
has a gap to drill, the bubble will immediately "drill in" and
vibrate to make the dirt layer fall off. Due to the cavitation, the
two liquids will disperse rapidly at the interface and be
emulsified When cleaning the surface of the parts, the oil is
emulsified and the solid particles fall off by themselves. When the
ultrasound propagates in the cleaning solution, it will produce
positive and negative alternating sound pressure, form jet, and
impact the cleaning parts. At the same time, due to the nonlinear
effect, it will produce sound flow and micro sound flow, while the
ultrasonic cavitation will produce high-speed micro jet at the
solid and liquid interface. All these effects can destroy the dirt,
remove or weaken the boundary The dirty layer can increase the
mixing and diffusion effect, accelerate the dissolving of soluble
dirt and strengthen the cleaning effect of chemical cleaning agent.
It can be seen that any place where the liquid can be immersed and
the sound field exists has a cleaning effect, and its
characteristics are applicable to the cleaning of parts with very
complex surface shape. In particular, the use of this technology
can reduce the amount of chemical solvents, thus greatly reducing
environmental pollution.
Car / Motor / Truck Wash Rinse Dry Ultrasonic Parts Cleaner Multi Tank Industrial Ultrasonic Cleaner