Wave Generator Circuit Ultrasonic Pcb Cleaning Machine 1000W 28khz/40khz Frequency Cleaning

ultrasonic wave generator circuit for ultrasonic transducer 1000W 28khz/40khz frequency cleaning

1. Output power: 0-3000W optional 3000W-20000W to be customized

2. Input voltage: 180-265V AC or 85-135V AC. 50/60Hz

3. Working temperature: - 20 - - +65 C

4. Output harmonic parameters: 97% (Min)

5. Start-up peak current (3000W load): less than or equal to 9A

6. Working frequency: 20K-250KHz (more than 250K needs to be customized)

7. Remote control voltage: 6-15VDC, high voltage off, soft start after low level recovery.

8. Maximum temperature of MOS/IGBT: 50 degrees (3000W load, 25 degrees ambient temperature test).

9. Average trouble-free time: 50000 hours. (100000 hours optional)

10. Maximum current envelope VALLEY-PEAK ratio (unilateral): 66%. (Other models on the market are up to 5%. Because this ratio is relatively large, it is non-destructive to the transducer and does not burn the cylinder)

11. Triangular wave energy transfer circuit solves the problem of explosive machine and cylinder burner perfectly. The power is very stable regardless of temperature, water level, load change.

12. Digital display output power.

13. Perfect protection circuit, over-temperature, over-voltage, low voltage, over-current and short-circuit protection can monitor the possible problems of generator in real time.

14. The power is continuously adjustable.

ultrasonic wave generator circuit for ultrasonic transducer 1000W 28khz/40khz frequency cleaning