Ours ultrasonic Co.,Ltd |
|
Polymer Materials Ultrasonic Plastic Welding Machine Low Frequency 110V Or 220V
Polymer materials for ultrasonic plastic welding 15khz and 20khz
The ultrasonic welding machine is suitable for mobile shell
welding, charger welding, CF card, battery shell welding, U disk
welding, SD card welding, adapter welding, USB connector welding,
Bluetooth welding, folder welding, photo album welding, watch
welding, kitchen utensils welding, mobile accessories welding, gold
brush welding, folding box welding. , PP hollow plate welding, pen
sleeve welding, ink box welding, hanger welding etc. plastic
products welding.
Features of the Ultrasonic Welding machine:
1. casting aluminum alloy base, super thick seamless steel pipe
column, rigid, no deformation under pressure.
2. with current overload protection, adjust the machine easily and
conveniently.
3. original Japanese piezoceramic transducer, Huang steel alloy
ultrasonic horn.
4. electronic frequency tracking, integrated alphabet circuit board
The advantages of automatic frequency tracking ultrasonic welding
machine:
1, the manual frequency regulation is not convenient, automatic
detection frequency is activated, and it is more convenient and
simple to use.
2. The built-in parameters are digitized by computer, and the
amplitude is automatically compensated. The amplitude and power of
the load are magnified synchronously when the load is heavier.
Thus, the transducer and the welding head die are effectively
protected, and the welding precision is higher.
3, the power output adopts the digital stepless linear regulation.
The output power is selected freely from 50% to 100%. The full
bridge IGBT module is used to enlarge the internal power. The
ultrasonic conversion rate is high and the maximum ultrasonic power
can reach 7200W, which can meet the requirements of all kinds of
welding.
4, more advanced protection circuit, output acoustic wave overload,
die sudden rupture overload, built-in computer detection circuit in
a very short time cut out the output, thus protecting the internal
circuit;
5. High speed handover of up to 135 times per minute can be used to
weld various non-standard automation equipment.
6, the operation interface can be selected in Chinese or English,
and foreign purchasing is more convenient.
7, the electric box control wiring is very simple, the rear two air
plug, the 30MM2 foot of the sound wave output, the 25MM7 foot
starting switch and the quick stop switch, plug in the power can
work; electric box volume smaller
Type | Power(W) | Frequency (KHz) |
ARS-SLHJ-1500W15 | 1500W | 15KHZ |
ARS-SLHJ-1500W20 | 1500W | 20KHZ |
ARS-SLHJ-1800W15 | 1800W | 15KHZ |
ARS-SLHJ-1800W20 | 1800W | 20KHZ |
ARS-SLHJ-2000W15 | 2000W | 15KHZ |
ARS-SLHJ-2600W15 | 2600W | 15KHZ |
ARS-SLHJ-2600W20 | 2600W | 20KHZ |
ARS-SLHJ-3200W15 | 3200W | 15KHZ |
ARS-SLHJ-4200W15 | 4200W | 15KHZ |
Polymer materials for ultrasonic plastic welding 15khz and 20khz