Guangdong Hongtuo Instrument Technology Co.,Ltd |
|
DahoMeter Digital Electronic Solid , Liquid , Powder Specific Gravity Meter, Specific Gravity Testing Equipment
Application:
It is suitable for the field of quality management,cost control,new
formula
researching,new materials researching, scientific academies,
researching key laboratories,quality
inspection.dye,bleach,leather,glaze,clay suspension.,etc
industrial.
Standards:
According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS
K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.
DE-120T can measure the density of solid and liquid; Features of
simple operation,wide application,fully function; alarm rings when
judge density is unqualified through the top and bottom limitation
setting.About the solid mode,function of measuring DIN volume
abrasion loss and expansibility of rubber,actual density and
apparent density of powder,oil content of oil bearing,density of
high density products.etc. adopt the memoryless dynamic measurement
method for liquid mode; function of measuring density with three
mode,get out of the cumbersome operation of re-calibrate when
change weight. Function of displaying concentration,density and
baume.
Specifications:
Density resolution: 0.0001 g/cm3
Maximum weight:120g
Minimum weight: 0.001g
Measurement range: 0.0001-99.9999g/cm3
Features:
(1) No need to open and close the lid,simple operation,shorter time
measuring,according to the specification of new materials
laboratory.
(2) Show the percentage composition of mixed samples for
researching and developing new materials.
(3) Automatically judge whether density is qualified or not;prompt
alarm.
(4) Function of solution compensation.either liquid or water can be
used as medium.
(5) Function of setting actual water temperature,measuring medium
density,and water proof medium density.
(6) Function of setting aerostatic buoyancy and the bound of
density.
(7) Adopt the completed high-capacity measurement accessories with
the transparent injection mould tank,which can resist wear,fall
off,and corrosion.
(8) Density value of samples with the temperature from normal to
100 centigrade can be measured.
(9) Take samples conveniently;50CC or less would be okay.
(10) It is very easy to clean the measurement cup,and can’t got the
limitation of the size of pycnometer caliber.
(11) Volatile liquid,corrosivity liquid,vicidity liquid,strong acid
and strong lye liquid can be measured quickly.
(12) Adopt the completed special windproof and dustproof
cover,which makes the structure convenient and durable.
(13) Interface of RS-232C is included.the printer of DE-40 will be
available to connect PC with instrument.
Measurement procedure of solid mode:
Measurement procedure of liquid mode:
Measurement procedure of hydroscopicity products(porosity
products):
Specification Table:
Brand | DAHOMETER | ||
Model | DE-120T | ||
Density resolution | 0.0001 g/cm3 | ||
Weight range | 0.001~120g | ||
Density range | 0.0001—99.9999g/cm3 | ||
Solid | Measuring solid items | Density of all forms of solid,including
metal,rubber,plastic,film,floating body,powder,foam,viscous
body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover
the products of | |
Measuring mode | Archimedes principle | ||
Measurable project | density of general non-absorbency solid | ||
| About 5 seconds | ||
Memory method | memory in shorter time by one procedure | ||
Specific gravity measurement frame | unicase injection forming professional specific gravity
mesaturement frame | ||
Measurement tank | unicase injection forming transparent professional measurement tank | ||
Result disply | Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on. | ||
Funtion setting | Water temperature setting,density setting of medium of comparative
solution,density setting of medium of waterproofing treatment
,boung setting,aerostatic buoyancy setting, | ||
Mixed | Function introduction | automatically read the percentage of the main material in the two kinds of mixed materials | |
setting | freely set the density value of main material and subordinate material | ||
disply | density value,percentage of main material | ||
liquid | Measurement type | a:mobility liquid,vicidity liquid,volatile liquid,corrosivity
liquid,high temperature liquid,suspension liquid,emulsion and so
on. | |
Measurement principle | Archimedes principle displacement method | ||
Measurement | 3 group | ||
Measurement time | about 5 seconds | ||
Memory mode | memory in shorter time by one procedure | ||
Result disply | Density and baume | ||
Specific | stainless steel specific gravity measurement frame | ||
Function setting | Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water | ||
Measurement | distilled testing | ||
Calibration | auto correction with one button,auto detection. | ||
Output mode | standard interface of RS-232,output and | ||
Standard accessories | Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly | ||
Optional accessories | DE-40 printer,DE-20B anti corrosive liquid measurement assembly | ||
power | AC100V - 240V | ||
Main feature | data display,accuracy,speediness,convenience |