|
[China]
Trade Verify
Address: Room 2811,Building A,Guohui Financial Center,No.485 Changjiang Middle Road,Huangdao District,Qingdao City,Shandong Province
Contact name:Admin
Qingdao Fullwin Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Competitive Price Small Tractor Mini Excavator Backhoe Mini Excavator
Mini excavators are very suitable for operation in small space construction sites and The load-sensing system realizes the perfect match between the engine and the main pump, provides accurate flow, improves work efficiency, and saves fuel and time.
mini excavator high-end configuration, using hydraulic components of international famous brands to ensure the high reliability of the hydraulic system. and widely used indoor demolition, orchard planting, municipal engineering, greenhouses, wasteland reclamation, nursery ditching, and fertilization, pipelines, basement renovation, underground operations, etc.
The standard crushing pipeline can be equipped with various accessories such as a crushing hammer, ripper, wood grabber, auger, etc., one machine is multi-purpose; iron crawler and rubber crawler can be interchanged at any time to adapt to various working conditions In construction, the deflection arm is used, which can be deflected to easily dig the foot of the wall.
They are all hot selling exported to the USA, European, South Africa, Southeast Asia, and other overseas regions.
Specifications:
| Specifications | |
| Full Vehicle Weight | 4.2T |
| Rated Power | 27.0/2200kW/rpm |
| Swing Speed | 12rpm |
| Ground specific voltage | 36kPa |
| Stick digging force | 21.6kN |
| Overall Length | 5385mm |
| Overall Height(boom tip) | 1890mm |
| Track Width | 350mm |
| Minimum Ground Clearance | 350mm |
| Track Grounding Length | 1710mm |
| Max.Digging Height | 5030mm |
| Max.Digging Depth | 3390mm |
| Min. Rotation Radius | 2406mm |
| Bucket Capacity | 0.17m³ |
| Walking Speed(Fast/Low) | 2.7/4.4km/h |
| Climbing Ability | 58%/30° |
| Bucket Digging Force | 23.7kN |
| Engine | Yanmar |
| Overall Width | 1750mm |
| Overall height(top of cab) | 2455mm |
| Wheel Base | 1400mm |
| Tail Turning Radius | 1561mm |
| Track Width | 2190mm |
| Max.Dumping Height | 3365mm |
| Max.Digging Distance | 5523mm |
Notices:
1. Inspection should be carried out before operation to confirm
that there are no obstacles and other personnel within the moving
range of the boom and bucket, and the operation can be started only
after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed
according to the requirements of safety technical disclosure, and
it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the
transport vehicle is stopped, the bucket should be lowered as much
as possible, and the vehicle should not be smashed. It is strictly
forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the
slewing mechanism should be braked. The bucket should be 1m away
from the ground. The walking gradient shall not exceed the maximum
allowable gradient of the machine, drive downhill at a slow speed,
and it is strictly forbidden to slide in neutral gear. Turning
should not be too hasty, and padding should be reinforced when
passing through soft ground.
5. Before the operator can leave the cab, the bucket must be
dropped and the engine turned off.
6. Do not lift materials with buckets.
7. When abnormal operation is found, it should be stopped
immediately, and the operation can be continued after
troubleshooting.
8. When the tire excavator is moving on a slope, the bucket should
be turned to the side of the high slope.
9. When using an excavator to demolish a structure, the operator
should analyze the collapse direction of the structure, and leave a
space for the structure to collapse between the excavator cab and
the demolished structure.
10. The excavator parking site should be flat and solid, and the
traveling mechanism must be braked when stopping.
Applications:
The main uses of the excavator: in road construction projects to
excavate trenches, in construction projects to excavate the
foundation, in water conservancy projects to excavate ditches,
canals and dredging rivers, in quarries, open-pit mining and other
projects for the stripping and excavation of ore, etc.; in addition
to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used
for lifting, pouring, installation, piling, ramming and pile
pulling.
Company Brief Introduction:
Mini Excavator, Full Energy, You will become a Big Winner!
Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, Scissor elevator, forklift and electric forklift together with other machinery fields. Through these products, our Mini Excavators sell pretty hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customer’s good likes!
And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really hot as well.
All Products have obtained ISO9001, CE, SGS, EPA and TUV Certificated.
