The KL9020 is attached to the end of the Bus Terminal block in the
same way as the standard terminal KL9010 and terminates the
terminal block. The KL9020 enables the connection of an Ethernet cable with a RJ45 plug. The K-bus signals are converted to RS485.
Power to the KL9020 electronics is supplied via the K-bus. The
KL9020 forms a properly working unit together with at least one
KL9050. Apart from a supply voltage of 24 V and the insertion of
the Ethernet cable, there is no further parameterization or
configuration work necessary. The Bus Coupler carries out all
diagnosis and commissioning tasks.
Current consumption K-bus | typ. 70 mA |
Power contacts | max. 24 V DC/max. 10 A |
Electrical isolation | 500 V (power contact/supply voltage/K-bus) |